1 2 3 5 4 6 7 8 Global Connector Technology Ltd. - USB3105: μUSB Receptacle, Type AB, Through-Hole, Vertical, with 1.5mm Through-Hole Shell Stakes A 0.15±0.05 0.25±0.05 E CL 2.35 1.95 C L 7.15 B D 0.78 2.90 0.80 7.96 1.00 A B C Designed to comply with physical, electrical and environmental requirements of Micro USB Standard (USB2.0), A/B types support USB On-The-GO (OTG) interface. C 5.00 0.6 REF 1.5 E If you seek longer shell stakes for a thicker PCB (for example 1.60mm (.062”)) please see USB3106. 4.75 Specifications 规格: Pin 5 3.50 1 0.65 2.60 5.30 3 2 1.00 Pin 1 0.78 5 4 RECOMMENDED P.C.B LAYOUT (PASTE-IN-HOLE) 5 0.65 2.60 RECOMMENDED P.C.B LAYOUT (WAVE SOLDER) D D Electrical 电气规格: Voltage Rating 电压额定值: 30V Current Rating 电流额定值: Signal (Pins 2,3,4) 信号:1.0 A Power (Pins 1,5) 电源:1.8 A Operating Temperature 工作温度: -55°C to +85°C Contact Resistance 接触电阻值: 30 mΩ max. Insulating Resistance 绝缘电阻值: 1000 MΩ min. Dielectric Withstand Voltage 耐电压: 100 V AC/minute GENERAL TOLERANCE: ±0.05 AS VIEWED FROM COMPONENT SIDE Solder Area Component Outline F Ordering Grid 0.65 G 1 5 0.25±0.05 E 30 USB3105 Contact Plating 30 = 30µ" Gold 2.60 A Packing Options A = Tape & Reel Tolerances (Except as noted) Part Number:- SA SA CM CM AJO DETAIL DRAWING RELEASE PCN USB3105-001 DRAWING UPDATE PCN USB3105-002 TOLERANCES ADDED REV DATE A 04/04/11 B 22/06/11 C 17/10/11 D 23/0112 E 07/03/13 1 2 X.X ± 0.35 X.XX ± 0.25 3 4 Date:- USB3105 Dimensions in mm By E C F Mechanical 机械性规格: Mating Force 插入力: 35N Max. Unmating Force 拨出力: Initial 10N Min., 初始 10N Final 8N Min., 最后 8N Durability耐久性: 10,000 Cycles 次插拨 REQUEST SAMPLES AND QUOTATION (1.5K per Reel) H D Finish表面处理: Underplating 底层电镀: Nickel 镍 100µ" min. Plating 电镀: Contact Area 接触面积: 30µ" Gold plating, 30 µ" 镀金 Solder Tails 焊接末端: Gold Flash 闪金 B Metallic Shell 金属外壳: Nickel 镍 100µ" min. 4 1.00 3 R0.175 R0.20 CL 1.35 1.85 1 2 E R0.4 C L 0.28 R0.20 Materials 材料: Plastic Housing 塑胶外壳: LCP, UL94V-0, Black, LCP, UL94V-0 黑色 Contact Terminal 接触端子: Copper Alloy 铜合金 Metallic Shell 金属外壳: Stainless Steel 不锈钢 SUS304 T=0.2mm 7.15 0.35 1.35 0.78 C L R0.175 R0.475 7.15 0.35 1.00 0.8 6.20 1.00 6.90 D GC 04 APR 11 Description:- µUSB Receptacle, Type AB, Through-Hole, Vertical, with 1.5mm Through-Hole Shell Stakes Third Angle Projection 5 C THIS DRAWING IS CONFIDENTIAL AND MUST NOT BE COPIED OR DISCLOSED WITHOUT WRITTEN CONSENT 6 G H www.gct.co Scale Revision Material Drawn by NTS E See Note SA 7 Sheet No. E & OE 8 1/2 1 3 2 5 4 6 7 8 Global Connector Technology Ltd. - USB3105: μUSB Receptacle, Type AB, Through-Hole, Vertical, with 1.5mm Through-Hole Shell Stakes A A RoHS Label 環保標簽 圆孔 PCS/Reel Reels/Carton PCS/Carton Products P/N B USB3105-30-A I/O Direction 卷盤繞逆時針方向轉動 4 16.5 50 上 MI N. 帶 10 B 15000 Notes注意: 1.Part Conforms to EIA-481-C Standards 产品符合EIA-481-C标准 2.All dimensions in millimeters 所有尺寸均是毫米 3.10 sprocket hole pitch cumulative tolerance±0.2mm Triangle Liner (4 PCS) 三角形班轮 C 1500 C Inner Box 内盒 Peel off Angle 剝皮角度 165° ~ 180° D 245 Ø330 D 1 E 2 120MM MIN 10 empty cavities 前留空區 3 Q'TY 300MM MIN 25 empty cavities 後留空區 Connectors in cavities 连接器的腔 RoHS Label 環保標簽 36 5 E 5 36 Label 标签 Carrier Tape 载带 NOTE: F 1 2 3 4 Holes 圆孔 F There are 10 empty cavities at the start of the reel 前留空區(10PCS)，無成品。 Quantity as per the Table 数量按表。 There are 25 empty cavities at the end of the reel 后留空區(25PCS)，無成品。 There are 50mm tape without the carrier只有上帶，無下帶。 G G Cover Tape 盖带 Label 标签 Tolerances (Except as noted) Part Number:- H By SA SA CM CM AJO DETAIL DRAWING RELEASE PCN USB3105-001 DRAWING UPDATE PCN USB3105-002 TOLERANCES ADDED REV DATE A 04/04/11 B 22/06/11 C 17/10/11 D 23/0112 E 07/03/13 1 2 Date:- USB3105 Dimensions in mm GC 04 APR 11 Description:- µUSB Receptacle, Type AB, Through-Hole, Vertical, with 1.5mm Through-Hole Shell Stakes 3 4 Third Angle Projection 5 C THIS DRAWING IS CONFIDENTIAL AND MUST NOT BE COPIED OR DISCLOSED WITHOUT WRITTEN CONSENT 6 H www.gct.co Scale Revision Material Drawn by NTS E See Note SA 7 Sheet No. E & OE 8 2/2