GF1650LA Voltage Range 50 Volts Current 16.0 Amperes 16 AMPS. SCHOTTKY BARRIER RECTIFIER Features .Low forward voltage drop .High current capability .High reliability .High surge current capability Mechanical Data .Cases: TO-220AC molded plastic .Epoxy: UL 94V-O rate flame retardant .Terminals: Lead solderable per MIL-STD-202, Method 208 guaranteed .Polarity: As marked .High temperature soldering guaranteed: 260℃/10 seconds/ .25”,(6.35mm) from case .Weight: 2.24 grams Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number GF1650LA UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 V Maximum RMS Voltage VRMS 35 V VDC I(AV) 50 V 16.0 A IFSM 275 A Maximum DC Bl℃king Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) IRRM 1.0 A Maximum Instantaneous Forward Voltage at (Note 2) IF=16A, Tc=25℃ VF 0.65 V Maximum Instantaneous Reverse Current @ Tj =25℃at Rated DC Blocking Voltage (Note 2) @ Tj =125℃ IR 0.5 50 mA Typical Junction Capacitance (Note 3) Cj 450 pF RθJC 1.5 -55 to +150 -55 to +200 -55 to +150 ℃/W Maximum Thermal Resistance, Junction to Case Operating Junction Temperature Range In DC forward mode Storage Temperature Range TJ TSTG mA ℃ ℃ NOTES:1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Mounted on Heatsink Size of 2 in x 3 in x 0.25in Al-Plate. Page 1 of 2 http://www.21yangjie.com RATING AND CHARACTERISTIC CURVES GF1650LA Page 2 of 2 http://www.21yangjie.com