HFR15A06 Glass Passivated Hyperfast Recovery Rectifier Voltage Range 600 V Current 15.0 Ampere Features Fast switching for high efficiency Low noise Trr = 30ns Low reverse leakage current High voltage super FRD PFC application TO-220AC .057(1.45) .052(1.33) Mechanical Data Case: Molded plastic TO-220AC Epoxy: UL 94V-0 rate flame retardant , Terminals: Solderable per MIL-STD-202 method 208 Mounting position: Any Weight: 2.07 grams MAX.412(10.5) .638(16.2) .602(15.3) PIN 1 2 MAX.07(1.7) .056(1.43) .048(1.22) .185(4.70) .175(4.44) .072(1.82) .062(1.58) .037(0.94) .027(0.68) .055(1.40) .045(1.14) .27(6.86) .23(5.84) .154(3.91) DIA .137(3.50) .128(3.25) .114(2.90) YENYO .526(13.35) .508(12.90) .102(2.60) .088(2.25) .025(0.64) .014(0.35) .205(5.20) .195(4.95) 1 2 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. CHARACTERISTIC HFR15A06 SYMBOL Min. Typ. Max. UNIT Recurrent Peak Reverse Voltage VRRM - - 600 V RMS Voltage VRMS - - 420 V VDC - - 600 V IF(AV) - - 15.0 A IFSM - - 200 A VF - - 2.4 1.8 V IR - - 10 uA 500 uA Maximum Reverse Recovery Time (Note 1) Trr - - 30 nS Maximum Power Dissipation PD - - 100 W Typical junction Capacitance (Note 2) CJ - 60 - DC Blocking Voltage Average Forward Rectified o Current TC=140 C Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) o Instantaneous Forward Voltage @15A(25 C) o @15A(150 C) o DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=150 C Typical Thermal Resistance (Note 3) Operating Junction and Storage Temperature Range R JC - - 1.5 TJ, TSTG -65 - 175 pF o CW o C NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A. (2) Junction Capacitance test conditions : VR = 10V,IF = 0A. (3) Thermal Resistance junction to case. 1/3 R6,SEP-10 RATINGS AND CHARACTERISTIC CURVES HFR15A06 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 200 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 15.0 12.0 9.0 6.0 3.0 60 Hz Resistive or Inductive load Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 150 100 50 0 0 0 25 75 50 125 100 150 175 1 FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 1000 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IINSTANTANEOUS FORWARD CURRENT, AMPERES 100 NUMBER OF CYCLES AT 60Hz o CASE TEMPERATURE, C o TJ=150 C 10 TJ=25 o C 1.0 0.5 0 0.5 1 1.5 2 2.5 o TJ=150 C 100 10 o TJ=25 C 1 0.1 0 3 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - Trr , ta AND tb CURVES vs FORWARD CURRENT FIG.6 - Trr , ta AND tb CURVES vs FORWARD CURRENT 50 100 o o Tc= 25 C, dIF/dt = 100A/us Tc= 100 C, dIF/dt = 100A/us t , RECOVERY TIMES (ns) t , RECOVERY TIMES (ns) 10 40 trr 30 ta 20 10 80 trr 60 tb 40 ta 20 tb 0 0 1 5 10 15 1 IF , FORWARD CURRENT (A) 5 10 15 IF , FORWARD CURRENT (A) YENYO TECHNOLOGY CO., LTD. 2/3 R6,SEP-10 RATINGS AND CHARACTERISTIC CURVES HFR15A06 FIG.8 - TYPICAL JUNCTION CAPACITANCE FIG.7 - Trr , ta AND tb CURVES vs FORWARD CURRENT 175 o Tc= 175 C, dI � F/dt = 100A/us 150 JUNCTION CAPACITANCE, pF t , RECOVERY TIMES (ns) 175 trr 125 100 tb 75 50 ta 25 150 125 100 75 50 25 0 0 1 5 10 0 15 50 100 150 200 REVERSE VOLTAGE, VOLTS IF , FORWARD CURRENT (A) YENYO TECHNOLOGY CO., LTD. 3/3 R6, SEP-10