CLV1681A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Base Stations • Mobile Communications • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1651 Typ Max Units 1711 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -97 dBc/Hz Harmonic Suppression (2nd) -15 dBc Tuning Voltage 2 4.4 MHz/V 59 Tuning Sensitivity (avg.) 2 dBm Input Capacitance 50 pF Pushing 2 MHz/V Pulling (14 dB Return Loss, Any Phase) 5 MHz 85 °C Max Units Power Output -2 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 0 Vdc MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 11 Vdc 14 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CLV1681A-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 1800 1780 1760 1740 1720 1700 1680 1660 1640 1620 1600 1580 1560 1540 1520 1500 1480 1460 1440 1420 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.4 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 4 3 2 1 0 0.030 MIN. CUTBACK FROM LIVE PADS -1 -2 -3 -4 1452 1504 1547 1584 1618 1650 1680 1709 1737 1759 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B