CLV1025E-LF PHASE NOISE (1 Hz BW, typical) Rev C3 Voltage-Controlled Oscillator Surface Mount Module Applications • Basestations • Satellite Communications • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 865 Typ Max Units 1180 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -110 dBc/Hz Harmonic Suppression (2nd) -12 dBc Tuning Voltage 1 14 MHz/V 30 Tuning Sensitivity (avg.) 10 dBm 150 pF Pushing 2 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Power Output 1 Load Impedance 5.5 Vdc 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-14S Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 24 Vdc 29 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CLV1025E-LF Voltage-Controlled Oscillator Surface Mount Module Rev C3 Tuning Curve, typ. FREQUENCY (MHz) 1230 1180 1130 1080 85 °C 25 °C 1030 980 -40 °C 930 880 830 780 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 14 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 12 10 8 0.030 MIN. CUTBACK FROM LIVE PADS 6 4 2 0 806 841 869 897 925 953 981 1009 1038 1068 1098 1127 1156 1185 1213 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B