CRO8000Z-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Satellite Communications • Wireless Communications • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 7890 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -99 Harmonic Suppression (2nd) -40 Tuning Voltage 0.5 Max Units 8010 MHz dBc/Hz -30 dBc 4.5 Vdc MHz/V 42 Tuning Sensitivity (avg.) 5 dBm Input Capacitance 50 pF Pushing 2 MHz/V Pulling (14 dB Return Loss, Any Phase) .5 MHz 85 °C Max Units Power Output -4 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) .5 VCO-24H Min Typ 5 149 Vdc 157 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CRO8000Z-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 8050 8030 8010 7990 85 °C 25 °C 7970 7950 7930 -40 °C 7910 7890 7870 7850 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 8 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 6 4 0.030 MIN. CUTBACK FROM LIVE PADS 2 0 -2 -4 -6 7864 7881 7897 7913 7930 7948 7968 7990 8013 8036 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions 24 23 22 21 20 PIN CONFIGURATION 2 3 4 5 6 7 19 Z-COMM XXXXXXXX-LF W/O# D/C 1 8 18 17 16 15 P1 P2-12 P13 P14-16 P17 P18-24 RF OUTPUT GROUND Vcc GROUND Vtune GROUND 14 13 9 10 11 12 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B