SMV0162A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Test Instrumentation • Digital Radios / RF Modems • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 125 Typ Max Units 200 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -102 dBc/Hz Harmonic Suppression (2nd) -15 dBc Tuning Voltage 0.7 8.3 MHz/V 13 Tuning Sensitivity (avg.) 11 dBm 500 pF Pushing 2 MHz/V Pulling (14 dB Return Loss, Any Phase) .5 MHz 85 °C Max Units Power Output 1 Load Impedance 6 Vdc 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements SUB-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 33 Vdc 40 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SMV0162A-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 220 200 180 85 °C 25 °C 160 -40 °C 140 120 100 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.3 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 11 RECOMMENDED FOOTPRINT 10 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 9 8 7 6 5 4 0.030 MIN. CUTBACK FROM LIVE PADS 3 2 1 108 115 121 128 135 142 148 154 160 166 173 179 186 192 199 205 211 215 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B