SMV0915L PHASE NOISE (1 Hz BW, typical) Rev C3 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Cellular • VHF Communications • Test Equipment £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 905 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -100 Harmonic Suppression (2nd) -10 Tuning Voltage 0.5 Max Units 925 MHz dBc/Hz -8 dBc 2.5 Vdc MHz/V 75 Tuning Sensitivity (avg.) 6 dBm Input Capacitance 50 pF Pushing 5 MHz/V Pulling (14 dB Return Loss, Any Phase) 5 MHz 85 °C Max Units Power Output 1 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 3.5 SUB-L Min Typ Supply Voltage (Vcc, nom.) 3 Supply Current (Icc) 6 Vdc 8 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SMV0915L Voltage-Controlled Oscillator Surface Mount Module Rev C3 Tuning Curve, typ. FREQUENCY (MHz) 1050 1000 950 900 85 °C 25 °C 850 -40 °C 800 750 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 2.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 8 RECOMMENDED FOOTPRINT 7 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 6 5 4 3 0.030 MIN. CUTBACK FROM LIVE PADS 2 1 0 786 805 824 844 863 883 902 922 943 964 985 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B