SMV5550B-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Microwave Radios • Satellite Communications • Point to Multi-Point £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 5000 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -80 Harmonic Suppression (2nd) -35 Tuning Voltage 0 Tuning Sensitivity (avg.) Power Output Max Units 6000 MHz dBc/Hz -30 dBc 10 Vdc MHz/V 135 0 6 dBm Input Capacitance 50 pF Pushing 20 MHz/V Pulling (20. dB Return Loss, Any Phase) 10 MHz 85 °C Max Units Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements Supply Voltage (Vcc, nom.) Supply Current (Icc) 3 SUB-L Min Typ 5 24 Vdc 29 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module SMV5550B-LF Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 6200 6100 6000 5900 5800 5700 5600 5500 5400 5300 5200 5100 5000 4900 4800 85 °C 25 °C -40 °C 0 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 8 RECOMMENDED FOOTPRINT 7 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 6 5 4 3 0.030 MIN. CUTBACK FROM LIVE PADS 2 1 0 4830 4985 5125 5280 5442 5599 5743 5866 5966 6045 6107 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B