SMV5000A-LF PHASE NOISE (1 Hz BW, typical) Rev D4 Voltage-Controlled Oscillator Surface Mount Module Applications • Microwave Radios • Point to Multi-Point • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 4780 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -79 Harmonic Suppression (2nd) -30 Tuning Voltage 0.5 Max Units 5220 MHz dBc/Hz -27 dBc 4.5 Vdc MHz/V 150 Tuning Sensitivity (avg.) 4 dBm Input Capacitance 50 pF Pushing 13 MHz/V Pulling (20. dB Return Loss, Any Phase) 10 MHz 85 °C Max Units Power Output 0 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 2 SUB-L Min Typ Supply Voltage (Vcc, nom.) 4.1 Supply Current (Icc) 20 Vdc 25 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SMV5000A-LF Voltage-Controlled Oscillator Surface Mount Module Rev D4 Tuning Curve, typ. FREQUENCY (MHz) 5400 5300 5200 5100 85 °C 25 °C 5000 4900 4800 -40 °C 4700 4600 4500 4400 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 8 RECOMMENDED FOOTPRINT 7 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 6 5 4 3 2 1 0.030 MIN. CUTBACK FROM LIVE PADS 0 -1 -2 4507 4599 4674 4748 4824 4906 4993 5086 5177 5266 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B