SMV5840A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Microwave Radios • Fixed Broadband Wireless • Point to Multi-Point £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 5820 Typ Max Units 5860 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -84 dBc/Hz Harmonic Suppression (2nd) -30 dBc Tuning Voltage 0.5 2.5 MHz/V 130 Tuning Sensitivity (avg.) 3 dBm Input Capacitance 50 pF Pushing 10 MHz/V Pulling (14 dB Return Loss, Any Phase) 9 MHz 85 °C Max Units Power Output -3 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 0 Vdc SUB-L Min Typ Supply Voltage (Vcc, nom.) 3 Supply Current (Icc) 20 Vdc 24 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SMV5840A-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 6100 6080 6060 6040 6020 6000 5980 5960 5940 5920 5900 5880 5860 5840 5820 5800 5780 5760 5740 5720 5700 5680 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 4 RECOMMENDED FOOTPRINT 3 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 2 1 0 -1 0.030 MIN. CUTBACK FROM LIVE PADS -2 -3 5725 5807 5878 5945 6008 6074 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B