V910ME20-LF PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Fixed Wireless • Broadband Transmission • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 3920 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -83 Harmonic Suppression (2nd) -23 Tuning Voltage 1 Max Units 4520 MHz dBc/Hz -14 dBc 7 Vdc MHz/V 168 Tuning Sensitivity (avg.) 7 dBm Input Capacitance 50 pF Pushing 14 MHz/V Pulling (14 dB Return Loss, Any Phase) 7 MHz 85 °C Max Units Power Output 1 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 4 MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 30 Vdc 36 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V910ME20-LF Voltage-Controlled Oscillator Surface Mount Module Rev B2 Tuning Curve, typ. 4720 FREQUENCY (MHz) 4620 4520 4420 4320 85 °C 25 °C 4220 4120 4020 -40 °C 3920 3820 3720 3620 3520 0 1 2 3 4 5 6 7 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 10 9 8 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 2 1 0 3570 3740 3890 4054 4222 4379 4515 4625 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B