V495ME02-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Test Equipments • RF Modems • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 483 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -115 Harmonic Suppression (2nd) -15 Tuning Voltage 0.5 Tuning Sensitivity (avg.) Power Output Max Units 543 MHz dBc/Hz -12 dBc 4.5 Vdc MHz/V 26 -5 1 dBm 400 pF Pushing 1 MHz/V Pulling (12 dB Return Loss, Any Phase) 1 MHz 80 °C Max Units Load Impedance -2 50 Input Capacitance Operating Temperature Range -30 Package Style Power Supply Requirements MINI-14S-LOW Min Typ Supply Voltage (Vcc, nom.) 4.5 Supply Current (Icc) 41 Vdc 50 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module V495ME02-LF Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 590 570 550 80 °C 25 °C -30 °C 530 510 490 470 450 430 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 4 3 2 1 0 -1 0.030 MIN. CUTBACK FROM LIVE PADS -2 -3 -4 -5 -6 446 467 483 498 511 524 535 547 558 568 FREQUENCY (MHz) 80 °C 25 °C -30 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B