SMV2165A-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Broadband Transmission • PCS • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2118 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -90 Harmonic Suppression (2nd) -10 Tuning Voltage 0 Max Units 2218 MHz dBc/Hz -9 dBc 3 Vdc MHz/V 148 Tuning Sensitivity (avg.) 9 dBm Input Capacitance 50 pF Pushing 15 MHz/V Pulling (20. dB Return Loss, Any Phase) 15 MHz 85 °C Max Units Power Output 3 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 6 SUB-L Min Typ Supply Voltage (Vcc, nom.) 3.3 Supply Current (Icc) 16 Vdc 20 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B SMV2165A-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 2520 2490 2460 2430 2400 2370 2340 2310 2280 2250 2220 2190 2160 2130 2100 2070 2040 2010 1980 1950 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 9 RECOMMENDED FOOTPRINT 8 SEVERAL HOLES OF O0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 7 6 5 0.030 MIN. CUTBACK FROM LIVE PADS 4 3 1970 2067 2149 2217 2291 2370 2441 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF Out Vcc GROUND PACKAGE H SUB MINI 0.110 SUB MINI-L 0.080 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B