PCMCIA Modules PCM-3794/3594 PCI-104 2-slot PCMCIA Module /Three IEEE-1394 Port Daughter Board Specifications Standard 1997 PC Standard compliant PCI Local bus Specification Revision 2.1/2.2 compliant ACPI 1.0 compliant PC98/99 compliant Other Supports distributed DMA and PC/PCI DMA Compatibility Mix-and-match 5V/3.3V PC Card16 cards and 3.3V CardBus cards PCM-3594 Daughter Board Standard OHCI link function designed to IEEE-1394 Open Host Controller Interface (OHCI) Specification OHCI link function is IEEE-1394-1995 compliant and compatible with proposal 1394a Supports serial bus data rates of 100, 200, and 400 Mb/sec Operating Temperature 32°F ~ 140°F (0°C ~ 60°C) Features PCMCIA Socket Supports Two Type II Cards or One Type III Card Supports R2 and Cardbus Supports Two PC Cards or CardBus Slots Ordering Information Supports Three IEEE-1394 Ports (with PCM-3594) • PCM-3794-A10 PCI-104 two-slot PCMCIA Module • PCM-3794-A10-01 PCI-104 two-slot PCMCIA Module with PCM-3594 PCM-3115B PC/104 2-slot PCMCIA Module Specifications Standard Memory Interface Indicator Power Requirement Complies with PCMCIA v.2.1 and JEIDA v4.2 Programmable 8KB boot FLASH ROM 16-bit data bus Busy status LED +5V Ordering Information • PCM-3115B PC/104 two-slot PCMCIA Module Features PCMCIA Socket Supports Two Type I/II Cards or One Type III Card Supports Bootable Function From Linear Flash Card, ATA Card, and SRAM Card 9-5 Note: All specifications are subject to change without notice.