SPECIFICATION FOR APPROVAL REF : PAGE: 1 PROD. ABC'S DWG NO. SMD TOROIDAL POWER FILTER NAME ST1409□□□□L□-□□□ ABC'S ITEM NO. Ⅰ﹒CONFIGURATION & DIMENSIONS： A : A' : B : C : C' : D : 13.80 14.80 14.00 7.90 9.20 11.70 ± 0.3 max. ± 0.3 typ. max. typ. m/m m/m m/m m/m m/m m/m C' A A' C 3R3 D B 11.70 3 1 4 14.00 2 2.54 ( PCB Pattern ) a Ⅱ﹒SCHEMATIC DIAGRAM： 1 2 3 c 4 b Ⅲ﹒MATERIALS： a﹒Core：Iron toroidal core Peak Temp：260℃ max. Max time above 230℃ ：50sec max. Max time above 200℃ ：70sec max. b﹒Case：PPS-R7 c﹒Wire：Enamelled copper wire ( Class F ) d﹒Adhesive：Epoxy resin e﹒Remark：Products comply with RoHS' b﹒Storage Temp.：-40℃ ----+130℃ 150 ~ 200 ℃ / 60 ~ 120sec Reflow Area +2.0 ~ 4.0℃ Forced Cooling Area -(1.0 ~ 5.0)℃ / sec max. Peak Temperature: 260℃ 50sec max. Temperature ( ℃ ) a﹒Temp. rise ：40℃ typ. Preheat Area +4.0 ℃ / sec max. 250 requirements Ⅳ﹒GENERAL SPECIFICATION： Temperature Rising Area 230℃ 200 150 70sec max. 100 50 c﹒Operating Temp.：-25℃----+130℃ d﹒Resistance to solder heat：260℃.10 Secs. AE-001A 0 50 100 150 Time ( seconds ) 200 250 SPECIFICATION FOR APPROVAL REF : PAGE: 2 PROD. SMD TOROIDAL POWER FILTER NAME ABC'S DWG NO. ST1409□□□□L□-□□□ ABC'S ITEM NO. Ⅴ﹒ELECTRICAL CHARACTERISTICS： Inductance @10KHz, 0.1 Vrms ( µH ) DWG No. RDC(mΩ) ( Each Winding ) Irms(A) Isat(A) typ. max. ST14093R3ML□-□□□ 3.30 ± 20% 14.5 11.0 7.80 10.40 ST14096R8ML□-□□□ 6.80 ± 20% 21.0 16.0 6.20 7.20 ST1409220ML□-□□□ 22.00 ± 20% 57.0 44.0 3.80 3.50 1). □：Packaging information … A：Bulk B：Taping Reel 2)."- □□□":Reference code 3). Irms base on Temp. rise 40℃ typ. 4). Isat base on △L/L0A=35％ typ. @ Inductance VS. DC Current Curve @ DC Current VS. Temp. Rise ( △T ) Curve 220 20 Temperature Rise(℃) Inductance(uH) 25 15 10 6R8 5 3R3 0 0 AE-001A 1 DC Current(A) 10 40 35 30 25 20 15 10 5 0 220 6R8 3R3 0 2 4 6 DC Current(A) 8 SPECIFICATION FOR APPROVAL REF : PAGE: 3 PROD. NAME ABC'S DWG NO. SMD TOROIDAL POWER FILTER ST1409□□□□L□-□□□ ABC'S ITEM NO. Ⅵ﹒PACKAGING INFORMATION： ( 1 ) Configuration T Cover Tape N A B 2.0±0.5 ∮C ∮C D G Embossed carrier ※ Carrier tape width : D P: 24m/m 4 m/m End Start 3R3 Leader no component 200 m/m min. 3R3 3R3 Trailer no component 400 m/m min. Components User direction of feed （2） Dimensions : (m/m) Style A 13 - 24 330 B 21±0.8 C 13±0.5 D G 24 26 +0 N 50 T -0 30.4 （3） Q'TY & G.W. Per package : Inner : Reel Type ST1409 AE-001A Q'TY (pcs) 150 G.W. (gw) 400 Outer : Carton Style 13 - 24 Q'TY (pcs) 600 G.W. (kg) 3.0 Size (cm) 40 x 40 x 24 SPECIFICATION FOR APPROVAL REF : PAGE: 4 PROD. NAME SMD TOROIDAL POWER FILTER ABC'S DWG NO. ST1409□□□□L□-□□□ ABC'S ITEM NO. Ⅶ﹒DWGING NUMBER EXPRESSION： S T 1 4 0 9 Reference code Appendix code 2 : Package Appendix code 1 : Classification Tolerance code Electrical code Dimension code Type code Appendix code 1：Product Classification L：Lead Free Standard products comply with RoHS' requirements 1 ~ 9：Lead Free Special products comply with RoHS' requirements Appendix code 2：Package Information Code AE-001A Inner Package A T.B.D. B T / R ( Reel Package ) Inner Package Q'TY T.B.D. 150 pcs Remark REF : PAGE: 5 PROD. NAME SMD TOROIDAL POWER FILTER ABC'S DWG NO. ST1409□□□□L□-□□□ ABC'S ITEM NO. Ⅷ﹒RELIABILITY TEST： Test item Solderability Thermal shock test ( Temp. cycle ) Specification Test condition More than 90% of the terminal electrode Shall be covered With fresh solder. Preheat : 150±25℃ for 60 seconds Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5℃ Flux : Rosin Dip time : 4±1 seconds Inductance shall not change more than ±20% Room temp. 15 minutes -25±2 ℃ 30 minutes Room temp. 15 minutes 85±2 ℃ Total : 50 cycles Humidity Resistance test High temp. Resistance test AE-001A Temperature : 40±2℃ Humidity : 90 ~ 95% Applied current : Per spec. Time : 500 hours Temperature : 80±2℃ Applied current : Per spec. Time : 500 hours 30 minutes SPECIFICATION FOR APPROVAL REF : PROD. NAME PAGE: 6 SMD TOROIDAL POWER FILTER ABC'S DWG NO. ST1409□□□□L□-□□□ ABC'S ITEM NO. Ⅸ﹒UL CARD： OBMW2 Magnet Wire-Component September 8, 2000 JUNG SHING WIRE CO LTD 231 CHUNG CHENG RD, SEC 3 JEN-TEH HSIANG, TAINAN HSIEN TAIWAN Mtl Dsg AIW CFUEWB EIAIW EILOCKY EILOCKW EIW EIW-2 FL.EILOCKY LSFFW LSUEW PEW PEY SF.FLW SF.EIW SF.BY@ SF.FLY@ SF.BLOCKBS SF.EILOCKY# SF.EILOCKBS SF.BW@ SFFW Mark Dsg ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ BC Polyamideimide Polyurethane Polyesterimide Polyesterimide Polyesterimide Polyesterimide Polyesterimide Modified Polyester Polyurethane Polyurethane Polyester Polyester Modified Polyester Polyesterimide Modified Polyester Modified Polyester Modified Polyester Polyesterimide Polyesterimide SFFY UEW-1 UEW-2 UEW-4 UEY UEY-2 OC ____ ____ Polyamideimide Polyamide Modified ____Epoxy ____ Polyamide ____ ____ ____ ____Nylon ____ Nylon Nylon Modified Polyamide Polyamide Modified Polyamide ____ Modified Polyester Polyurethane 287806002 Mtl Dsg Coat Typ E174837 ANSI Type Temp Class MW81-C MW75C MW35C ___ ___ 220 130 200 180 200 ___ MW74-C ___ MW79-C ___ ___ MW24-C MW26C MW77C MW27-C MW27-C ___ ___ ___ 180 180 MW26C MW79 ____ ____ ____ ____ ____ BC Coat Typ Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane 155 155 A not-for-profit organization dedicated to public safety and committed to quality service Page 1 of 2 Mark Dsg ____ 220 200 155 155 130 155 155 155 180 155 155 155 OC Polyamide ____ ____ ____ Nylon Polyamide ANSI Type MW80C MW2-C ___ MW75C MW28-C MW28-C Temp Class 155 105 130 130 130 130 @-May be suffixed by LZ; # - May be suffixed by LZ, EL or LZI. LZ - Signifies magned wires twisted together; EL - signifies base coated magnet wire laid parallel with top coat applied overall; LZL - signifies base coated magnet wire twisted together and covered with top coat overall. or榮星電線 Marking: Company name or trademarks , material designation or marked designation on packaed or reel, and Recognized Component Mark. See General Information Preceding These Recognitions For use only in equipment where the acceptability of the combination is determined by Underwriters Laboratories Inc. 287806002 AE-001A Page 2 of 2 OBMW2⁄E174837 September 8 , 2000 SPECIFICATION FOR APPROVAL PAGE: 7 REF : PROD. NAME SMD TOROIDAL POWER FILTER QMFZ2 ABC'S DWG NO. ST1409□□□□L□-□□□ ABC'S ITEM NO. Wednesday,January 22, 2003 Component-Plastics CHEVRON PHILLIPS CHENICAL CO L P E54700 RTI Min UL94 Mech Thk Flame Elec Imp Str Col mm Mti Dsg Class Polyphenylene sulfide (PPS), glass reintorced, designated "RYTON", furnished as pellets. R-4-230NA NC 0.38 0.71 1.5 1.8 3.0 6.0 V-0 V-0 V-0 5VA V-0, 5VA V-0, 5VA 130 200 220 220 220 220 130 200 200 200 200 200 130 200 220 220 220 220 H W I H A I H V T R D 4 9 5 C T I — 4 0 — 0 0 — 1 0 — 0 0 4 4 4 4 4 4 5 5 5 5 5 5 4 4 4 4 4 4 5 5 5 5 3 3 3 3 Sunday,August 23, 1998 Polyphenylene sulfide (PPS), glass reintorced, mineral reinforced, designated "RYTON", furnished as pellets. R-7 NC,BK,TN 0.71 1.5 3.0 6.0 V-0 V-0 V-0 V-0 200 220 220 220 200 220 220 220 Underwriters Laboratories Inc. AE-001A 1 1 1 — 200 220 220 220 R 0 0 0 — 0 0 0 0