UNO-2176 Intel® Pentium® M/Celeron® M Fanless Box PC with 2 x LAN, 6 x COM, 8 x DI, 8 x DO Features Onboard Pentium® M 1.4 GHz/Celeron® M 1.0 GHz Onboard 512 KB battery-backup SRAM Two RS-232 and four isolated RS-232/422/485 ports with automatic flow control 8-ch Isolated DI and 8-ch Isolated DO with counter and timer Two 10/100Base-T RJ-45 ports Two USB ports PC/104 expansion slots Windows® CE 5.0 & 6.0, Windows XP Embedded SP2, and Linux ready solution Onboard system status LED indicators Supports Boot from LAN function Fanless design with no internal cabling RoHS COMPLIANT 2002/95/EC Introduction UNO-2176 is an embedded automation computer that supports PC/104 expansion, serial communication ports and several other networking interfaces. UNO-2176 supports Windows XP Embedded OS and Windows CE 5.0 & 6.0, which offers a pre-configured image with optimized onboard device drivers. Windows XP Embedded delivers the power of the Windows operating system in componentized form. You can seamlessly integrate your applications into Windows XP Embedded and speed up your system development with an application ready platform that can provide a rich networking interface to fulfill diverse requirements. Specifications USB Digital Inputs General Certification Dimension (W x D x H) Enclosure Mounting Power Consumption Power Requirements Weight OS Support CE, FCC Class A, UL, CCC 255 x 152 x 59 mm (10" x 6.0" x 2.36") Aluminum Wallmount 24 W (Typical) 9 ~ 36 VDC (e.g +24 V @ 2 A) (Min. 48 W), AT 2.4 kg Windows XP Embedded, Windows 2000/XP, Windows CE 5.0 & 6.0, Linux Digital Outputs Timer/Counter System Hardware CPU Memory Battery Backup SRAM Indicators Keyboard/Mouse PC/104 Slot Storage Display Watchdog Timer Pentium M 1.4 GHz, Celeron M 1.0 GHz 512 MB DDR SDRAM 512 KB LEDs for Power, IDE, Alarm for battery backup SRAM, Diagnosis (programmable), LAN (Active, Status) and Serial (Tx, Rx) 1 x PS/2 PC/104 Supports +5V Power SSD: 1 x internal type I/II CompactFlash® slot HDD: Build-in one 2.5" SATA/IDE HDD bracket DB15 VGA connector, 1600 x 1200 @ 85 Hz Programmable 256 levels timer interval, from 1 to 255 sec Environment Humidity Operating Temperature Operating Humidity Shock Protection Vibration Protection I/O Interface Serial Ports Serial Port Speed LAN 2 x RS-232 2 x isolated RS-232/422/485 with DB9 connectors 2 x isolated RS-232/422/485 with 5-pin screw terminal Automatic RS-485 data flow control Isolation protection: 2,000 VDC Surge protection: 2,000 VDC (EFT) (COM1, COM2) RS-232: 50 ~ 115.2 kbps, (COM3-COM6) RS-232: 300 ~ 115.2 kbps RS-422/485: 300 ~ 921.6 kbps (Max.) 2 x 10/100Base-T RJ-45 ports (Built-in boot ROM in flash BIOS) Fanless Box PCs 2 x USB, EHCI, Rev. 2.0 compliant 8-ch wet contact - Logic 0: 0 ~ 3 VDC ; Logic 1: 10 ~ 50 VDC - 2,000 VDC isolation - 2,000 VDC ESD protection - 70 VDC over-voltage protection - ±50 VDC input range and 10 kHz speed - Interrupt handling speed: 10 kHz 8-ch DO - 2,000 VDC isolation and 200 mA max/channel sink current - Keep output status after system hot reset - 5 ~ 40 VDC output range and 10 kHz speed Timer/Counter - Counter source: DI1 & DI3, Pulse output: DO2 & DO3 - Can be cascaded as one 32-bit counter/timer - Down counting, preset counting value - Timer time base: 100 kHz, 10 kHz, 1 kHz, 100 Hz 95% @ 40° C (non-condensing) UNO-2176-C11E: -20 ~ 65° C (-4 ~ 149° F) @ 5 ~ 85% RH UNO-2176-P11E: -20 ~ 60° C (-4 ~ 140° F) @ 5 ~ 85% RH 20 ~ 95% (non-condensing) IEC 68 2-27 CompactFlash®: 50 G @ wall mount, half sine, 11 ms HDD: 20 G @ wall mount, half sine, 11 ms IEC 68 2-64 (Random 1 Oct./min, 1hr/axis.) CompactFlash®: 2 Grms @ 5 ~ 500 Hz, HDD: 1 Grms @ 5 ~ 500 Hz Ordering Information UNO-2176-C11BE UNO-2176-P11BE Celeron M 1 GHz, 512 MB RAM Fanless Box PC Pentium M 1.4 GHz, 512 MB RAM Fanless Box PC Accessories UNO-PCM22-AE UNO-FPM21-AE 2 x PC/104 expansion kit for UNO-2100 series UNO-2000 series VESA mount kit