RoHS CHC03 Ceramic Core High Q Chip Inductors Dimensions: Inches (mm) Terminal wrap around: 0.15 mm min. Both Ends Features • 0603 size suitable for pick and place automation. • Ceramic core provide high self resonant frequency. • High Q values at high frequencies • Low DC resistance • High Current and low loss excellent for RF applications. Allied Part Number Inductance Tolerance (nH) (%) Resistance to Soldering Heat Test Method: Reflow Solder the device onto PCB. Peak Temp: 260ºC ± 5ºC for 10 sec. Solder Composition: Sn/Ag3.0/Cu0.5 Total test time: 6 minutes L/Q Test Freq. (MHz) SRF Min. (MHz) DCR Max. (Ω) Irms (mA) Max. CHC03-1N6K-RC 1.6 10 24 250/250 12500 .030 2400 CHC03-3N6K-RC 3.6 10 24 250/250 5900 .048 2300 CHC03-3N9K-RC 3.9 10 25 250/250 5900 .054 2200 CHC03-6N8K-RC 6.8 10 35 250/250 5800 .054 2100 CHC03-7N5K-RC 7.5 10 35 250/250 3700 .059 2100 CHC03-8N2K-RC 8.2 10 38 250/250 3700 .071 2000 CHC03-10NK-RC 10 10 38 250/250 3700 .071 2000 CHC03-12NK-RC 12 10 38 250/250 3000 .075 2000 CHC03-15NK-RC 15 10 38 250/250 2800 .080 1900 CHC03-18NK-RC 18 10 40 250/250 2800 .099 1900 CHC03-22NK-RC 22 10 42 250/250 2400 .099 1800 CHC03-24NK-RC 24 10 42 250/250 2400 .105 1800 Electrical Inductance Range: 1.6nH to 24nH Tolerance: 5% over entire range Available in in tighter tolerances Test Frequency: At specified Frequency with Test OSC @ 200mV. Operating Temp: -40ºC ~ 125ºC Irms: Based on 15ºC temperature rise @ 25ºC Amient. Q Min. Test Equipment (L/Q): HP4286A / HP4287A / Agilent E4491A (SRF): HP8753D / Agilent E4991A (DCR): Chen Hwa 502NC (Irms): HP4284A + HP42841A / HP4285A + HP4284A + HP42841A Available in tighter tolerances. All specifications subject to change without notice. Physical Packaging: 4000 pieces per 7 inch reel Marking: Single Dot Color Code System 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/30/08 www.alliedcomponents.com