RoHS FCHC10 Ferrite Core Chip Inductors High Current Dimensions: Inches (mm) Terminal wrap around: 0.15 mm min. Both Ends Allied Part Number Inductance Tolerance (µh) (%) Q Min. L,Q Test Freq. (MHz) SRF Min. (MHz) DCR Max. (Ω) IDC (mA) FCHC10-1R0K-RC 1.0 10 25 7.96 300 .34 1500 FCHC10-1R2K-RC 1.2 10 25 7.96 280 .40 1400 FCHC10-1R5K-RC 1.5 10 25 7.96 270 .42 1400 FCHC10-2R2K-RC 2.2 10 25 7.96 140 .50 1200 FCHC10-3R3K-RC 3.3 10 25 7.96 95 .65 1000 FCHC10-4R7K-RC 4.7 10 25 7.96 90 .80 800 FCHC10-6R8K-RC 6.8 10 25 7.96 68 1.0 730 FCHC10-100K-RC 10 10 20 2.52 45 1.5 700 FCHC10-150K-RC 15 10 20 2.52 40 2.2 500 FCHC10-220K-RC 22 10 20 2.52 25 2.7 470 FCHC10-330K-RC 33 10 20 2.52 25 4.5 400 FCHC10-470K-RC 47 10 16 2.52 20 8.0 300 Features • Designed for higher curent applications • Accurate and consistent dimensions for auto insertion. • Highly resistant to mechanical forces • Excellent reliability in temperature and climate change • Excellent Solderability Characteristics Electrical Inductance Range: 1.0 µh to 47µh Tolerance: 10% across entire range, also available in 5%. Test Frequency: (L/Q) as specified, test OSC @ 200mV Operating Temp. Range: -25ºC ~ 85ºC IDC: Inductance drop 10% Typ. from original value with no current. Resistance to Solder Heat Test Method: Reflow solder the device onto PCB i sec. l Peak Temp: 260ºC ± for 10 Solder Composition: Sn/Ag3.0/Cu0.5 Test time: 6 minutes Test Equipment All specifications subject to change without notice. After soldering, (L & Q): HP4191A / HP4285A -6°C. (DCR): Chen Hwa 502BC push l0 to 2000) x 10 (SRF): HP4291A / HP8753D RF Impedance Analyzer (IDC): HP4284A with HP42841A Physical Packaging: 2000 pieces per 7 inch reel Marking: Three Dot Color Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/11/08 www.alliedcomponents.com