RoHS High Frequency Chip Inductors Dimensions: HFC05 0.063±0.006 (1.60±0.15) Inches (mm) 0.031±0.006 (0.80±0.15) 0.031±0.006 (0.80±0.15) 0.012±0.008 (0.30±0.20) 0.023 (0.60) 0.031 (0.79) Allied Part Number HFC05-1N0S-RC HFC05-1N2S-RC HFC05-1N5S-RC HFC05-1N6S-RC HFC05-1N7S-RC HFC05-1N8S-RC HFC05-2N2S-RC HFC05-2N5S-RC HFC05-2N7S-RC HFC05-3N3K-RC HFC05-3N9K-RC HFC05-4N3K-RC HFC05-4N7K-RC HFC05-5N1K-RC HFC05-5N4K-RC HFC05-5N6K-RC HFC05-6N2K-RC HFC05-6N8K-RC HFC05-7N5K-RC HFC05-8N2K-RC HFC05-10NK-RC HFC05-11N5K-RC HFC05-12NK-RC HFC05-15NK-RC HFC05-18NK-RC HFC05-22NK-RC HFC05-27NK-RC HFC05-33NK-RC HFC05-39NK-RC HFC05-47NK-RC HFC05-56NK-RC HFC05-62NK-RC HFC05-68NK-RC HFC05-75NK-RC HFC05-82NK-RC HFC05-100NK-RC HFC05-120NK-RC HFC05-150NK-RC HFC05-180NK-RC HFC05-220NK-RC HFC05-270NK-RC Inductance Tolerance Q Q (nh) Typical Typical (%) @100MHz @100MHz @800MHz 1.0 1.2 1.5 1.6 1.7 1.8 2.2 2.5 2.7 3.3 3.9 4.3 4.7 5.1 5.4 5.6 6.2 6.8 7.5 8.2 10 11.5 12 15 18 22 27 33 39 47 56 62 68 75 82 100 *120 *150 *180 *220 ***270 0.3nh 0.3nh 0.3nh 0.3nh 0.3nh 0.3nh 0.3nh 0.3nh 0.3nh 10 10 12 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 15 15 15 17 17 18 18 18 18 18 18 18 18 18 *14 *15 *15 *15 *13 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 50 65 47 47 47 51 46 46 45 51 52 52 41 52 41 41 44 44 44 44 45 45 46 48 48 45 43 39 ***37 ***35 ***32 ***34 ***34 ***32 ***32 ***20 **23 **23 **21 **20 **14 SRF Typical (MHz) DCR Max. (Ω) IDC Max. (mA) 10000 10000 8000 8000 8000 8000 7200 6200 6200 5200 5000 4750 4750 4100 4100 4100 3750 3750 3300 3300 3000 2800 2600 2500 2400 2000 1900 1600 1400 1300 1100 1050 1050 900 900 770 650 550 520 500 470 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.14 0.16 0.16 0.18 0.18 0.18 0.22 0.22 0.24 0.24 0.26 0.30 0.28 0.32 0.35 0.40 0.45 0.55 0.60 0.70 0.75 0.85 0.85 1.00 1.00 1.20 2.30 2.40 2.70 2.80 3.50 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 1000 600 600 600 500 500 400 400 400 400 400 400 300 300 300 300 250 250 250 150 *at 50MHz. **at 300MHZ. ***at 500MHz. Additional Inductance values available upon request. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 3/23/09 0.041 (1.04) Features • 0603 EIA size for high board density applications. • Excellent Q and SRF characteristics for high frequency applications. • Cost effective monolithic construction Electrical Inductance range: 1.0nh to 270nh Tolerance: use S for ± .3nh, J for 5%, K for 10% Test Frequency: Inductance and Q tested at 100MHz, 200mv with HP4191A Impedance Analyzer + HP16197A Inductance vs Freq. Characteristics measured on HP4191A Q vs Frequency Characteristics measured on HP4191A SRF measured with HP4291A & HP16197A DCR measured with Chen Hwa CH502BC or HP4338B IDC measured with HP4291-A + HP6632A Mechanical Operating Temperature: -55ºC-125ºC Storage Temperature: Under 25ºC, Humidty 40% - 65% Solderability: 90% terminal coverage Test Condition: Pre heat: 150ºC 1min. Solder composition: Sn/Ag3.0/Cu.0.5 (Pb free) Solder temp: 245ºC±5ºC (pb Free) Immersion time: 4 ± 1 sec. Resistance to solder heat: No damage to part Test Condition Pre heat: 150ºC. 1min. Solder composition: Sn/Ag3.0/Cu.0.5 (Pb free) Solder temp: 260ºC±5ºC (pb Free) Immersion time: 10 ± 1 sec. Physical Packaging: 4000 pieces per 7 inch reel. www.alliedcomponents.com