RoHS Power Chip Shielded Inductors Dimensions: PCS2D09 Inches (mm) Rated Current (A) Irms (A) Typ. 0.0975 0.53 1.24 100 0.1100 0.40 1.15 30 100 0.1313 0.34 1.06 2.2 30 100 0.1438 0.32 1.05 PCS2D09-2R7T-RC 2.7 30 100 0.1500 0.28 0.98 PCS2D09-3R3T-RC 3.3 30 100 0.1938 0.25 0.84 PCS2D09-3R9T-RC 3.9 30 100 0.2250 0.23 0.72 PCS2D09-4R7T-RC 4.7 30 100 0.2875 0.21 0.64 Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec. +/- 1 sec. Allied Part Number Inductance (µh) Tolerance (%) PCS2D09-1R2T-RC 1.2 30 100 PCS2D09-1R5T-RC 1.5 30 PCS2D09-1R8T-RC 1.8 PCS2D09-2R2T-RC Test Freq. KHz,1v RDC (Ω) Max PCS2D09-5R6T-RC 5.6 30 100 0.3250 0.19 0.59 PCS2D09-6R8T-RC 6.8 30 100 0.4250 0.17 0.53 PCS2D09-8R2T-RC 8.2 30 100 0.4750 0.15 0.46 PCS2D09-100T-RC 10 30 100 0.5375 0.14 0.42 PCS2D09-220T-RC 22 30 100 1.5000 0.15 PCS2D09-330T-RC 33 30 100 1.8000 0.14 Features • Shielded SMD Power Inductor • Available in magnetically shielded • Low DC resistance • Ideal for DC-DC converter applications Electrical Inductance Range: 1.2µh to 33µh Tolerance: 30% over entire range Also, available in tighter tolerances Test Frequency: 100KHz, 0.1V Operating Temp: -30ºC ~ +100ºC Rated Current: Current at which inductance drop is equal to 35% typ. Irms: current at which ∆ T=40m Test Equipment (L): PM3260A / HP4284A / HP4285A (RDC): Chen Hwa 502BC Rated Current: HP4284A+HP42841A or Chen Hwa 1061 + Chen Hwa 301A Physical All specifications subject to change without notice. Packaging: 1000 pieces per 7 inch reel. Marking: 2 Character alpha code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 15 REVISED 12/11/08 www.alliedcomponents.com