RoHS Power Chip Shielded Inductors Dimensions: Tolerance (%) PCS6D38 Inches (mm) Allied Part Number Inductance (µh) PCS6D38-2R7N-RC 2.7 30 10 .020 3.6 PCS6D38-3R3N-RC 3.3 30 10 .020 3.5 PCS6D38-4R7N-RC 4.7 30 10 .022 3.1 PCS6D38-5R0N-RC 5.0 30 10 .024 2.9 PCS6D38-6R2N-RC 6.2 30 10 .027 2.5 PCS6D38-7R4N-RC 7.4 30 10 .027 2.5 PCS6D38-8R7N-RC 8.7 30 10 .031 2.3 PCS6D38-100N-RC 10 30 10 .034 2.2 PCS6D38-120N-RC 12 30 10 .038 2.0 PCS6D38-150N-RC 15 30 10 .053 1.7 Resistance to Soldering Heat PCS6D38-180N-RC 18 30 10 .057 1.6 PCS6D38-220N-RC 22 30 10 .092 1.5 PCS6D38-270N-RC 27 30 10 .096 1.3 Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec. +/- 1 sec. PCS6D38-330N-RC 33 30 10 .109 1.2 PCS6D38-390N-RC 39 30 10 .124 1.1 PCS6D38-470N-RC 47 30 10 .138 .95 PCS6D38-560N-RC 56 30 10 .150 .85 PCS6D38-680N-RC 68 30 10 .202 .75 PCS6D38-820N-RC 82 30 10 .234 .70 PCS6D38-101N-RC 100 30 10 .324 .65 PCS6D38-561N-RC 560 30 10 .358 .22 Test Freq. KHz, 0.1V RDC (Ω) Max. Rated Current (A) All specifications subject to change wtihout notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 15 12/11/08 Features • Shielded SMD Power Inductor • Low DC resistance • Ideal for DC-DC converter applications Electrical Inductance Range: 2.7µh to 560µh Tolerance: 30% over entire range Also, available in tighter tolerances Operating Temp: -30ºC ~ +100ºC Rated Current: Current at which inductance drops by 35% of intial value or ∆ T=40ºC lower, whichever is lower Test Equipment (L): HP4284A LF Impedance Analyzer (RDC): Chen Hwa 502 Rated Current: HP4284+HP42841A or Chen Hwa 1061 + Chen Hwa 301A Physical Packaging: 1500 pieces per 13 inch reel. Marking: EIA Inductance Code www.alliedcomponents.com