RoHS Power Chip Shielded Inductors PCS3D16 Dimensions: Tolerance (%) Inches (mm) Allied Part Number Inductance (µh) PCS3D16-1R0T-RC 1.0 30 100 0.040 1.60 PCS3D16-1R5T-RC 1.5 30 100 0.052 1.55 PCS3D16-2R2T-RC 2.2 30 100 0.072 1.20 PCS3D16-3R3T-RC 3.3 30 100 0.085 1.10 Test Freq. KHz, 0.1V DCR (Ω) Rated Current (A) PCS3D16-3R6T-RC 3.6 30 100 0.090 0.95 PCS3D16-4R7T-RC 4.7 30 100 0.105 0.90 PCS3D16-6R8T-RC 6.8 30 100 0.170 0.73 PCS3D16-100T-RC 10 30 100 0.210 0.55 PCS3D16-150T-RC 15 30 100 0.295 0.45 PCS3D16-220T-RC 22 30 100 0.430 0.40 PCS3D16-270T-RC 27 30 100 0.620 0.35 PCS3D16-330T-RC 33 30 100 0.675 0.32 PCS3D16-680T-RC 68 30 100 1.700 0.18 PCS3D16-101T-RC 100 30 100 2.750 0.13 All specifications subject to change without notice. Features • Magnetically Shielded • Low DC Resistance • High Energy Storage • Low Energy Loss • Suitable for pick and place Electrical Inductance Range: 1.0µh to 100µh Tolerance: 30% over entire range, some values available in tighter tolerances Test Frequency: 100KHz, 0.1V Operating Temp: -30ºC ~ 100ºC Rated Current: Inductance Drop 35% Typ. at rated current or Temp Rise ∆ T=40ºC. Which ever is lower. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC Immersion time: 10 sec. +/- 1 sec. Test Equipment (L): HP 4192A LF Impedance Analyzer (RDC): Chen Hwa 502 (IDC): Chen Hwa 1061 + Chen Hwa 301A or HP4284A + HP42841A Physical Packaging: 1000 pieces per 13 inch reel. Marking: EIA Inductance Code. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 15 REVISED 12/11/08 www.alliedcomponents.com