RoHS PCS64 Power Chip Shielded Inductors Dimensions: Inches (mm) (5.00) XXX Features • Magnetically Shielded • Low DC Resistance • High Energy Storage • Low Energy Loss • Suitable for pick and place Electrical Inductance Range: 10µh to 1000µh Tolerance: 20% over entire range Test Frequency: 1KHz, 1V Operating Temp: -40ºC ~ 85ºC IDC: Inductance Drop 35% Typ. at rated IDC. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC Immersion time: 10 sec. +/- 1 sec. Test Equipment (L): HP 4192A LF Impedance Analyzer (RDC): Chen Hwa 502 (IDC): Chen Hwa 1061 + Chen Hwa 301A or HP4284A + HP42841A Physical Packaging: 1000 pieces per 13 inch reel. Marking: EIA Inductance Code. Allied Part Number Inductance (µh) Tolerance (%) PCS64-100M-RC 10 20 PCS64-120M-RC 12 20 PCS64-150M-RC 15 PCS64-180M-RC Test Freq. KHz, 1V DCR Max. (Ω) IDC (A) 1 0.12 1.35 1 0.13 1.22 20 1 0.18 1.11 18 20 1 0.24 1.02 PCS64-220M-RC 22 20 1 0.27 0.91 PCS64-270M-RC 27 20 1 0.30 0.82 PCS64-330M-RC 33 20 1 0.33 0.74 PCS64-390M-RC 39 20 1 0.37 0.69 PCS64-470M-RC 47 20 1 0.52 0.62 PCS64-560M-RC 56 20 1 0.56 0.58 PCS64-680M-RC 68 20 1 0.63 0.51 PCS64-820M-RC 82 20 1 0.71 0.46 PCS64-101M-RC 100 20 1 1.03 0.42 PCS64-121M-RC 120 20 1 1.15 0.38 PCS64-151M-RC 150 20 1 1.68 0.35 PCS64-181M-RC 180 20 1 1.87 0.32 PCS64-221M-RC 220 20 1 2.08 0.29 PCS64-271M-RC 270 20 1 2.37 0.26 PCS64-331M-RC 330 20 1 2.67 0.23 PCS64-391M-RC 390 20 1 2.94 0.22 PCS64-471M-RC 470 20 1 3.93 0.20 PCS64-561M-RC 560 20 1 5.43 0.18 PCS64-681M-RC 680 20 1 7.32 0.17 PCS64-821M-RC 820 20 1 8.24 0.15 PCS64-102M-RC 1000 20 1 9.26 0.14 All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 2/25/09 www.alliedcomponents.com