RoHS PCSLF0728 Power Chip Shielded Inductors Dimensions: Inches (mm) Features Allied Part Number Inductance (uH) Tolerance (%) Test Freq. KHz,0.5v DCR (Ω)±20% IDC (A) Shielded SMD Power Inductor Suitable for high current applications Low profile Low Power loss and High current PCSLF0728-2R2M-RC 2.2 20 1 0.032 1.8 PCSLF0728-3R3M-RC 3.3 20 1 0.037 1.6 PCSLF0728-4R7M-RC 4.7 20 1 0.045 1.5 PCSLF0728-5R0M-RC 5.0 20 1 0.045 2.4 PCSLF0728-6R8M-RC 6.8 20 1 0.059 1.3 PCSLF0728-8R2M-RC 8.2 20 1 0.065 1.1 PCSLF0728-100M-RC 10 20 1 0.083 1.1 PCSLF0728-150M-RC 15 20 1 0.130 .88 PCSLF0728-220M-RC 22 20 1 0.180 .75 (RDC): Chen Hwa 502BC PCSLF0728-330M-RC 33 20 1 0.240 .65 (IDC): HP4284A + HP42841A / Chen Hwa 1061+301A PCSLF0728-470M-RC 47 20 1 0.340 .54 • • • • Electrical Inductance Range: 2.2µh to 47µh Tolerance: 20% over entire range Operating Temp: -40ºC ~ +85ºC IDC: Current at which inductance drops by 10% of intial value Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Test Equipment (L): HP 4192A LF Impedance Analyzer Physical All specifications subject to change without notice. Packaging: 1000 pieces per 13 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 15 REVISED 12/12/08 www.alliedcomponents.com