revision for dwg # 1PB-1005E13 M20x1.5 or 1/2" NPT - date description original design 11/6/2007 revised by Philipp E. 78 mm [3.1 in] 180 mm [7.1 in] 93 mm [3.7 in] ch.no. - 140 mm [5.5 in] 72.5 mm [2.9 in] rev 3x n30 mm [1.2 in] 2 contact blocks can be used with an illuminated operator. 4 conctact blocks can be used with any non-illuminated operator. unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. titel 30 mm Aluminum Gravity Die Cast Enclosure 1005E13 (cable entry thread size: 2xM20) and 1007E13(cable entry thread size: 2x1/2"-14 NPT) drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/6/2007 drawing no.: rev.: 11/6/2007 1PB-1005E13 11/6/2007 scale: - - sheet: 1 of: 1