revision for dwg # 1PB-S12 rev ch.no. - - description original design date 11/21/2007 revised by Philipp E. 40.30 mm [1.6 in] 38.60 mm [1.5 in] 26.75 mm [1.1 in] unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. titel 30 mm Contact Element S12 drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/21/2007 drawing no.: 11/21/2007 1PB-S12 11/21/2007 scale: rev.: - sheet: 1 of: 1