revision for dwg # 1PB-2LHB rev ch.no. - - date description original design 11/15/2007 revised by Philipp E. 29.1 mm [1.1 in] 39.6 mm [1.6 in] 30.0 mm [1.2 in] unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. titel Bulb holder for illuminated Push buttons 2LHB drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/15/2007 drawing no.: 11/15/2007 1PB-2LHB 11/15/2007 scale: rev.: 1 - sheet: - of: -