revision for dwg # 1PB-1004G13 M20x1.5 or 1/2" NPT ch.no. - - description original design date 11/7/2007 revised by Philipp E. 78 mm [3.1 in] 45 mm [1.8 in] 225 mm [8.9 in] 185 mm [7.3 in] 73 mm [2.9 in] 135 mm [5.3 in] 93 mm [3.7 in] rev 4x n30 mm [1.2 in] unless otherwise specified: all dimensions are in millimeters third angle projection tolerance XX XX.X XX.XX ALL = = = = ±1 mm ±0.5 mm ±0.2 mm − mm This Drawing is the property of R M E T R I C 35 Royal Road Flemington, NJ 08822-6000 (908) 806-9400 Fax (908) 806-9490 and is a confidential disclosurelent without consideration other than the borrower’s agreement that it shall not be reproduced, copied, lent or disposed of directly or indirectly nor used for any purpose other than that for which it is specifically furnished. titel 30 mm Aluminum Enclosure Gravity Die Cast 1004G13 (cable entry thread size: 2xM20) and 1006G13 (cable entry thread size: 2x1/2"-14 NPT) drawn by: Philipp Ernstberger checked by: Laszlo Gyorgypal released by: Laszlo Gyorgypal 11/7/2007 drawing no.: rev.: 11/7/2007 1PB-1004G13 11/7/2007 scale: - - sheet: 1 of: 1