8 7 5 4 3 2 1 REVISIONS MATERIAL: LIGHT PIPE KIT (P/N: U77-1663-2010P) (IF ORDER SEPARATELY) CAGE: COPPER ALLOY D 6 REV. DESCRIPTION DATE PROPOSAL JUL22/09 ECN/E-R A APPROVED PLATING OPTION Y=2: 2.54um MIN. NICKEL D PLATING OPTION Y=3: 3.81um MIN. MATTE TIN OVER 1.27um MIN. NICKEL. LIGHT PIPE: CLEAR POLYCARBONATE BRACKET FOR LIGHT PIPE: STAINLESS STEEL LIGHT PIPE KIT (P/N: U77-1463-2010P) (IF ORDER SEPARATELY) SFP+PRESS FIT CAGE (P/N U77-A641M-X081) (IF ORDER SEPARATELY) PACKAGING: TRAY PACKAGING C TEMPERATURE RANGE: -40C TO +85C C SFP+PRESS FIT CAGE (P/N U77-A441M-X081) (IF ORDER SEPARATELY) LIGHT PIPE KIT (P/N: U77-1263-2010P) (IF ORDER SEPARATELY) B B P/N: U77-C641M-X081 SHOWN SFP+PRESS FIT CAGE (P/N U77-A241M-X081) (IF ORDER SEPARATELY) AMPHENOL PART NUMBER CONFIGURATION U77 - C X 4 1 M - X 0 8 1 PACKAGING 1 = TRAY PACKAGING PLATING 2 = NICKEL PLATING 3 = MATTE TIN PLATING NUMBER OF PORTS 2 = 2 PORTS 4 = 4 PORTS 6 = 6 PORTS A DECIMALS X.X 0.38 X.XX 0.25 1 6 5 4 REF. CODE IDENT. NO. 3 APPROVALS DRAWN ANGLES SEE NOTE 1 DO NOT SCALE DRAWING THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 7 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: MATERIAL AND FINISH P/N: U77-C241M-X081 SHOWN 8 P/N: U77-C441M-X081 SHOWN 03554 DATE J.SI JUL21/09 DESIGNED A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ELASTOMER EMI GASKET, WITH LIGHT PIPE CHECKED QA APPD SIZE IE APP'D A3 DWG APP'D SCALE 2 DWG. NO. 3:2 P-U77-CX41M-X081 SHEET PROJECT 1 REV. A 1 OF 11 8 7 4 5 6 3 2 1 REVISIONS REV. A D PART NUMBER DIM"A" DIM"B" U77-C261M-X081 29.25 33.75 U77-C461M-X081 57.75 62.25 U77-C661M-X081 86.25 90.75 DESCRIPTION DATE PROPOSAL JUL22/09 ECN/E-R APPROVED D DIM 'B' DIM "A" C C (55.20) 5.84 (TYP.) (2.30) B B 14.25 13.00 14.25 10.00 (TYP.) 11.50 37.10 (41.90) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: A DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 DRAWN ANGLES X.X 0.38 X.XX 0.25 DO NOT SCALE DRAWING APPROVALS 03554 DATE J.SI JUL21/09 DESIGNED A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ELASTOMER EMI GASKET, WITH LIGHT PIPE CHECKED QA APPD SIZE IE APP'D A3 DWG APP'D SCALE 2 DWG. NO. 1:1 P-U77-CX41M-X081 SHEET PROJECT 1 REV. A 2 OF 11 8 7 6 4 5 3 2 1 REVISIONS (33.75) REV. (48.73) 8.95±0.15 (TYP.) DESCRIPTION DATE PROPOSAL JUL22/09 ECN/E-R A APPROVED D (9.70) D 14.00±0.10 (TYP.) 28.25 U77-A261M-X081 C C (62.25) 56.75 U77-A461M-X081 B B (90.75) 85.25 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: A U77-A661M-X081 DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 DRAWN ANGLES X.X 0.38 X.XX 0.25 DO NOT SCALE DRAWING APPROVALS 03554 DATE J.SI JUL21/09 DESIGNED A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ELASTOMER EMI GASKET, WITH LIGHT PIPE CHECKED QA APPD SIZE IE APP'D A3 DWG APP'D SCALE 2 DWG. NO. 2:1 P-U77-CX41M-X081 SHEET PROJECT 1 REV. A 3 OF 11 8 7 4 5 6 3 2 1 REVISIONS REV. A D PART NUMBER DIM "C" DIM "D" U77-C241M-X081 29.70 34.25 U77-C441M-X081 58.20 62.75 U77-C641M-X081 86.70 91.25 DESCRIPTION DATE PROPOSAL JUL22/09 ECN/E-R APPROVED D 1.65 DIM "C" 2.54 (TYP.) 5.84 (TYP.) 8.41 A 38.90±0.30 C C 8.03 10.40±0.10 0.19±0.10 (OPENING BELOW PCB) 14.25 (TYP.) CENTER OF CONNECTOR GUIDE PIN PER SPEC PCB (10.21) (3.50) (1.57) SECTION A-A 35.40 MAX A B B DIM "D" MIN. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: A DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 DRAWN ANGLES X.X 0.38 X.XX 0.25 DO NOT SCALE DRAWING APPROVALS 03554 DATE J.SI JUL21/09 DESIGNED A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ELASTOMER EMI GASKET, WITH LIGHT PIPE CHECKED QA APPD SIZE IE APP'D A3 DWG APP'D SCALE 2 DWG. NO. 2:1 P-U77-CX41M-X081 SHEET PROJECT 1 REV. A 4 OF 11 8 7 4 5 6 3 2 1 REVISIONS REV. A D DESCRIPTION DATE PROPOSAL JUL22/09 ECN/E-R APPROVED D (13.00) NOTE: (13.00) PANEL CUTOUT SIZES PER SFF 8433 SPEC. FOR BELLY TO BELLY MOUNTING, DIM "E" (PCB THICKNESS) IS 3.0 mm MIN. DIM "F" RELATED TO DIM "E". FOR DIM "F" = DIM "E" - 0.44 mm. THE PANEL CUTOUT 10.40 mm MIGHT BE INCREASED UP TO 10.80 mm IN ORDER TO ACCOMODATE PCB TOLERANCE. C C E 10.40±0.10 (SEE NOTE) 8.03 (0.19) DIM "F" B B DIM "E" (3.00 MIN) 8.03 10.40±0.10 (SEE NOTE) SECTION E-E E UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: A DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 DRAWN ANGLES X.X 0.38 X.XX 0.25 DO NOT SCALE DRAWING APPROVALS 03554 DATE J.SI JUL21/09 DESIGNED A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ELASTOMER EMI GASKET, WITH LIGHT PIPE CHECKED QA APPD SIZE IE APP'D A3 DWG APP'D SCALE 2 DWG. NO. 2:1 P-U77-CX41M-X081 SHEET PROJECT 1 REV. A 5 OF 11 8 7 4 5 6 3 2 1 REVISIONS NOTES: 1. DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 2. PADS AND VIAS ARE CHASSIS GROUND. 3. THRU-HOLES, PLATING OPTIONAL. 4. SEE DRAWINGS P-UX76-A20-X00XX FOR CONNECTOR LAYOUT. A 12.05±0.10 (TYP.) DESCRIPTION DATE PROPOSAL JUL22/09 ECN/E-R REV. APPROVED 2.00±0.10 TYP. D 26.18 21.38 16.58 11.93 7.13 2.33 D THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) 0.95(12 PLCS) 41.90 X Z S 37.10 20 CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 19.93 22.83 25.33 28.50 5.68 8.58 11.08 14.25 0.00 PIN1 RECOMMENDED PCB DESIGN FOR SINGLE SIDE MOUNTING (P/N U77-C261M-X081) B 0.50±0.03(20 PLCS) 0.06 L W V 2.00±0.10 (TYP.) 2.00±0.10 (TYP.) ( DETAIL B SCALE 4 : 1 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: 1.05) DETAIL C SCALE 4 : 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 7 6 5 X.X 0.38 X.XX 0.25 1 MATERIAL AND FINISH 4 REF. CODE IDENT. NO. 3 APPROVALS DRAWN ANGLES SEE NOTE 1 DO NOT SCALE DRAWING 1.00 9.60 DECIMALS 8 0.80 (TYP.) 10 2.00±0.03 (20 PLCS) 0.06 L W V C X 1.40 4.10 5.00 4.50 11 4.10 15.00 1.05±0.05(12 PLCS) 0.1 M X Z S 0.00 A 1.55±0.05 0.05 L X Z S -W- D 10.00 1.05±0.00 0.1 S X Y BSC (SEE NOTE 1) 1.55±0.05 0.05 L Z S W -VC 25.00 22.80 20.00 17.10 (TYP.) -z- 2.50 ( TYP.) 3.60 (TYP.) 30.90 27.50 B (9.60) (TYP.) 35.00 32.50 C DETAIL D SCALE 4 : 1 B Y 0.1 S PATTERN REPEATS FOR EACH PORT. SPACING BETWEEN PORTS IS 14.25mm. APPLIES TO ALL GANGED LAYOUTS 03554 DATE J.SI JUL21/09 DESIGNED A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ELASTOMER EMI GASKET, WITH LIGHT PIPE CHECKED QA APPD SIZE IE APP'D A3 DWG APP'D SCALE 2 DWG. NO. 2:1 P-U77-CX41M-X081 SHEET PROJECT 1 REV. A 6 OF 11 4 5 6 1 A DATE JUL22/09 APPROVED D 2.33 THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) 11.93 THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) 26.18 21.38 DESCRIPTION PROPOSAL ECN/E-R REV. 16.58 11.93 7.13 2.33 2 REVISIONS NOTES: 1. DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 2. PADS AND VIAS ARE CHASSIS GROUND. 3. THRU-HOLES, PLATING OPTIONAL. 4. SEE DRAWINGS P-UX76-A20-X00XX FOR CONNECTOR LAYOUT. D 3 16.58 7 26.18 8 41.90 37.10 35.00 32.50 C 30.90 C 0.95±0.05(16 PLCS) 0.1 M X Z S 27.50 25.00 22.80 20.00 15.00 CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 10.00 B 5.00 1.05±0.05 0.1 S X Y Y -Z- B 1.05±0.05(25 PLCS) 0.1 M X Z S 0 0 A 28.50 25.33 22.83 19.93 17.43 14.25 11.08 8.58 5.68 3.18 0 RECOMMENDED PCB DESIGN FOR BELLY TO BELLY MOUNTING UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: DECIMALS X.X 0.38 X.XX 0.25 1 MATERIAL AND FINISH SEE NOTE 1 DO NOT SCALE DRAWING THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 APPROVALS DRAWN ANGLES 03554 DATE J.SI JUL21/09 DESIGNED 0 2.33 CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 11.93 X 26.18 BSC (SEE NOTE 1) 16.58 4.50 A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ELASTOMER EMI GASKET, WITH LIGHT PIPE CHECKED QA APPD SIZE IE APP'D A3 DWG APP'D SCALE 2 DWG. NO. 3:1 P-U77-CX41M-X081 SHEET PROJECT 1 REV. A 7 OF 11 8 7 4 5 6 3 2 1 REVISIONS NOTES: 1. DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 2. PADS AND VIAS ARE CHASSIS GROUND. 3. THRU-HOLES, PLATING OPTIONAL. 4. SEE DRAWINGS P-UX76-A20-X00XX FOR CONNECTOR LAYOUT. DESCRIPTION DATE PROPOSAL JUL22/09 ECN/E-R REV. A APPROVED D Y 54.68 57.00 49.88 40.43 42.75 45.08 35.63 26.18 28.50 30.83 21.38 11.93 14.25 16.58 7.13 2.33 D BSC (SEE NOTE 1) THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) B 0.95±0.05(20 PLCS) 41.90 0.1 M 37.10 35.00 32.50 30.90 C 27.50 25.00 22.80 C 20.00 15.00 1.05±0.05 0.1 S X Y -Z- X Z S 10.00 1.05±0.05(25 PLCS) 0.1 M X Z S 5.00 0.00 B B CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEPOUT (EXCEPT CHASSIS GROUND) 48.43 51.33 53.83 34.18 37.08 39.58 19.93 22.83 25.33 5.68 8.58 11.08 X 0.00 4.50 RECOMMENDED PCB DESIGN FOR SINGLE SIDE MOUNTING (P/N U77-C461M-X081) UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: A DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 DRAWN ANGLES X.X 0.38 X.XX 0.25 DO NOT SCALE DRAWING APPROVALS 03554 DATE J.SI JUL21/09 DESIGNED A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ELASTOMER EMI GASKET, WITH LIGHT PIPE CHECKED QA APPD SIZE IE APP'D A3 DWG APP'D SCALE 2 DWG. NO. 1:1 P-U77-CX41M-X081 SHEET PROJECT 1 REV. A 8 OF 11 8 7 5 6 4 3 2 1 REVISIONS NOTES: 1. DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 2. PADS AND VIAS ARE CHASSIS GROUND. 3. THRU-HOLES, PLATING OPTIONAL. 4. SEE DRAWINGS P-UX76-A20-X00XX FOR CONNECTOR LAYOUT. A D DESCRIPTION DATE PROPOSAL JUL22/09 ECN/E-R REV. APPROVED D 2.33 11.93 16.58 26.18 30.83 40.43 45.08 THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) 54.68 54.68 49.88 45.08 40.43 35.63 30.83 26.18 21.38 16.58 11.93 Y 7.13 2.33 THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) 41.90 37.10 35.00 32.50 C 0.95±0.05(28 PLCS) 0.1 M X Z S 30.90 27.50 C 22.80 20.00 15.00 10.00 1.05±0.05 0.1 S X Y -Z- 1.05±0.05(51 PLCS) 0.1 M X Z S 5.00 0 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 DO NOT SCALE DRAWING THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 7 6 5 4 REF. CODE IDENT. NO. 3 APPROVALS DRAWN ANGLES X.X 0.38 X.XX 0.25 8 2.33 0 11.93 16.58 26.18 CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) RECOMMENDED PCB DESIGN FOR BELLY TO BELLY MOUNTING A 30.83 CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 40.43 0 3.18 5.68 8.58 11.08 14.25 17.43 19.93 22.83 25.33 28.50 31.68 34.18 37.08 39.58 42.75 45.93 48.43 51.33 53.83 57.00 BSC (SEE NOTE 1) X 45.08 B 4.50 54.68 B 0 03554 DATE J.SI JUL21/09 DESIGNED A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ELASTOMER EMI GASKET, WITH LIGHT PIPE CHECKED QA APPD SIZE IE APP'D A3 DWG APP'D SCALE 2 DWG. NO. 2:1 P-U77-CX41M-X081 SHEET PROJECT 1 REV. A 9 OF 11 8 7 4 5 6 3 2 1 REVISIONS NOTES: 1. DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 2. PADS AND VIAS ARE CHASSIS GROUND. 3. THRU-HOLES, PLATING OPTIONAL. 4. SEE DRAWINGS P-UX76-A20-X00XX FOR CONNECTOR LAYOUT. DESCRIPTION DATE PROPOSAL JUL22/09 ECN/E-R REV. A APPROVED D THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) 83.18 78.38 73.58 68.93 64.13 59.33 54.68 49.88 45.08 40.43 35.63 30.83 26.18 21.38 16.58 11.93 Y 2.33 BSC (SEE NOTE 1) 7.13 D 0.95±0.05(28 PLCS) 0.1 M B X Z S 1.05±0.05(38 PLCS) 0.1 M 41.90 40.10 37.10 C X Z S C 35.00 32.50 30.90 27.50 25.00 22.80 20.00 15.00 1.05±0.05 0.1 S X Y -Z- B 10.00 5.00 B 0.00 RECOMMENDED PCB DESIGN FOR SINGLE SIDE MOUNTING (P/N U77-C661M-X081) A UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: DECIMALS X.X 0.38 X.XX 0.25 1 SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 APPROVALS DRAWN ANGLES MATERIAL AND FINISH DO NOT SCALE DRAWING CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 76.93 79.83 82.33 85.50 62.68 65.58 68.08 71.25 48.43 51.33 53.83 57.00 42.75 34.18 37.08 39.58 19.93 22.83 25.33 28.50 5.68 8.58 11.08 14.25 X 0.00 4.50 03554 DATE J.SI JUL21/09 DESIGNED A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ELASTOMER EMI GASKET, WITH LIGHT PIPE CHECKED QA APPD SIZE IE APP'D A3 DWG APP'D SCALE 2 DWG. NO. 1:1 REV. P-U77-CX41M-X081 SHEET PROJECT 1 A 10 OF 11 8 7 5 6 4 3 2 1 REVISIONS NOTES: 1. DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 2. PADS AND VIAS ARE CHASSIS GROUND. 3. THRU-HOLES, PLATING OPTIONAL. 4. SEE DRAWINGS P-UX76-A20-X00XX FOR CONNECTOR LAYOUT. DESCRIPTION DATE PROPOSAL JUL22/09 ECN/E-R REV. A APPROVED D D 2.33 11.93 16.58 26.18 30.83 40.43 45.08 54.68 59.33 68.93 73.58 THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) 83.18 78.38 83.18 85.50 35.63 40.43 42.75 45.08 49.88 54.68 57.00 59.33 64.13 68.93 71.25 73.58 21.38 26.18 28.50 30.83 7.13 11.93 14.25 16.58 0.95±0.05(40 PLCS) 0.1 M X Z S 2.33 THIS AREA DENOTES COMPONENTS KEEP-OUT (TRACES ALLOWED) 41.90 37.10 35.00 32.50 27.50 25.00 22.80 20.00 15.00 10.00 C C 30.90 5.00 Y 0 0 60.18 62.68 65.58 68.08 74.43 76.93 79.83 82.33 1.05±0.05 0.1 S X Y 0 3.18 5.68 8.58 11.08 17.43 19.93 22.83 25.33 31.68 34.18 37.08 39.58 45.93 48.43 51.33 53.83 -Z- CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 2.33 0 11.93 16.58 26.18 30.83 40.43 45.08 54.68 BSC (SEE NOTE 1) B 59.33 X 68.93 1.05±0.05(77 PLCS) 0.1 M X Z S 73.58 B 83.18 4.50 CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) RECOMMENDED PCB DESIGN FOR BELLY TO BELLY MOUNTING UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES ARE: A DECIMALS 1 MATERIAL AND FINISH SEE NOTE 1 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT PERMISSION FROM AMPHENOL CANADA CORP. 8 7 6 5 4 REF. CODE IDENT. NO. 3 DRAWN ANGLES X.X 0.38 X.XX 0.25 DO NOT SCALE DRAWING APPROVALS 03554 DATE J.SI JUL21/09 DESIGNED A Amphenol Canada Corp. TITLE 1XN SFP+ CAGE ELASTOMER EMI GASKET, WITH LIGHT PIPE CHECKED QA APPD SIZE IE APP'D A3 DWG APP'D SCALE 2 DWG. NO. 3:2 REV. P-U77-CX41M-X081 SHEET PROJECT A 11 OF 11 1