APS3611 870 GHz Two-way Active Power Splitter Optimized for MOCA-Enabled Subscriber equipment PRELIMINARY DATA SHEET - Rev 1.1 FEATURES • Single Input, Double Output Design • Gain profile compensates for inband MOCA line filter attenuation • Wideband Operation to 870 MHz • Supports both Analog TV and Digital TV Lineups AP S3 • Nominal 3 dB Gain • 5 dB Typical Noise Figure 61 1 • Single +5 V Supply, with Operation Down to +3.3 V • Current Adjust pin for optimizing distortion performance • High Linearity, Low Distortion • Single-Ended 75 Ohm Inputs/Outputs • RoHS Compliant Package S26 Package 12 Pin QFN 3 mm x 3 mm x 1 mm APPLICATIONS • Analog/Digital and All-Digital CATV Set-Top Boxes with Multiple Tuners and Multimedia Over Coax Alliance (MOCA) Functionality • Multiple-Tuner TVs, TV Tuner Cards and Broadband Media Centers PRODUCT DESCRIPTION This APS3611 active splitter from ANADIGICS accepts a broadband RF input from 50 MHz to 870 MHz and splits the signal to provide two broadband RF outputs with minimal degradation of quality. The single-package surface mount device amplifies the input using highly linear, low noise amplification stages, and couples the amplified signal to two separate output paths that each can drive either analog video, digital video or digital data tuners. The APS3611 offers a special frequency/ gain profile, which compensates for inband signal attenuation caused by MOCA line filters. Requiring a single voltage supply of +5 V, and operable down to +3.3 V, the active splitter is manufactured using ANADIGICS’ highly reliable GaAs MESFET process. The small surface mount QFN packaging makes this device ideal for use in today’s set-top boxes, televisions and video tuner cards requiring multiple-tuner solutions. RF Output 1 RF Input RF Output 2 Current Adjust GND Figure 1: Functional Block Diagram 02/2008 2 GND 3 GND RFOUT1 10 GND Paddle 4 5 9 GND 8 GND 7 GND 6 RFOUT2 RFIN 11 GND 1 12 IADJ GND GND APS3611 Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME DESCRIPTION 1 GND Ground 2 RFIN RFInput 3 GND Ground 4 IADJ CurrentAdjust 5 GND Ground 6 RFOUT2 RFOutput2 7 GND Ground 8 GND Ground 9 GND Ground 10 RFOUT1 RFOutput1 11 GND Ground 12 GND Ground PRELIMINARY DATA SHEET - Rev 1.1 02/2008 APS3611 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT SupplyVoltage(VCC) 0 +8 V RFInputPower - +25 dBmV MSL-1 - - MSLLevel COMMENTS perchannel Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT 50 - 870 MHz SupplyVoltage(VCC) - +5 - V RFInputPower(PIN) - - +18 Case Temperature (TC) -5 - +85 OperatingFrequency(f) COMMENTS dBmV perchannel °C nodamagetodeviceoperating over-30to+95°Crange The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. PRELIMINARY DATA SHEET - Rev 1.1 02/2008 3 APS3611 Table 4: Electrical Specifications (TAMB = +25 °C, VCC = +5 V, ICC = 120 mA, 75 Ω system, ref. Figure 12) MIN TYP MAX UNIT Gainat100MHz - 3.5 - dB NoiseFigure - 5 - dB CTB(1) - -74 - dBc CSO (1) - -67 - dBc XMOD(1) - -66 - dBc RFIsolation Input-Output Output-Output - 17 25 - dB InputReturnLoss - -15 - dB CurrentConsumption(ICC) - 120 - mA PARAMETER Notes: (1)132 channels, +15 dBmV input per channel. 4 PRELIMINARY DATA SHEET - Rev 1.1 02/2008 COMMENTS APS3611 PERFORMANCE DATA Figure 4: Input Return Loss (S11) vs. Frequency (TAMB = +25 °C, VCC = +5 V) Figure 3: Gain (S21) vs. Frequency (TAMB = +25 °C, VCC = +5 V) 7.0 0 6.5 -5 6.0 -10 -15 5.0 S11 (dB) S21 (dB) 5.5 4.5 -20 4.0 -25 3.5 -30 3.0 -35 2.5 -40 2.0 0 100 200 300 400 500 600 700 800 900 1000 0 1100 100 200 300 400 500 600 700 800 900 1000 1100 Frequency (MHz) Frequency (MHz) Figure 5: Reverse Isolation (S12) vs. Frequency (TAMB = +25 °C, VCC = +5 V) Figure 6: Output Return Loss (S22) vs. Frequency (TAMB = +25 °C, VCC = +5 V) 0 0 -5 -5 -10 -10 -15 S22 (dB) S12 (dB) -15 -20 -20 -25 -25 -30 -30 -35 -35 -40 -40 0 300 600 900 1200 1500 1800 2100 2400 2700 3000 0 100 200 300 400 500 600 700 800 900 1000 1100 Frequency (MHz) Frequency (MHz) Figure 8: Port-to-Port Isolation vs. Frequency (TAMB = +25 °C, VCC = +5 V) Figure 7: Noise Figure vs. Frequency (TAMB = +25 °C, VCC = +5 V) 6.0 Noise Figure (dB) 5.5 5.0 4.5 4.0 3.5 3.0 0 100 200 300 400 500 600 700 800 900 1000 1100 Frequency (MHz) PRELIMINARY DATA SHEET - Rev 1.1 02/2008 5 APS3611 Figure 9: CTB Frequency Figure 9: CTBvs. vs. Frequency (TAMB = +25 °C, (T VAMB CC = =+25 +5oC,V,Vcc132 channels, dBmV = +5V, 132 channels,+15 +15 dBmV input input power) per channel) -60 -65 CTB (dBc) -70 -75 -80 -85 -90 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) Figure 10: CSO vs. Frequency Figure 10: CSO vs. Frequency o (TAMB = +25 °C, VCC = +5 V, 132 channels, +15 dBmV input per channel) (TAMB = +25 C, Vcc = +5V, 132 channels, +15 dBmV input power) -60 -65 CSO (dBc) -70 -75 -80 -85 -90 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) Figure 11:XMOD XMOD vs. Figure 11: vs.Frequency Frequency o (TAMB = +25 °C, VCC = +5 V, 132 channels, +15 dBmV input per channel) (TAMB = +25 C, Vcc = +5V, 132 channels, +15 dBmV input power) -60 -65 XMOD (dBc) -70 -75 -80 -85 -90 0 100 200 300 400 500 600 700 Frequency (MHz) 6 PRELIMINARY DATA SHEET - Rev 1.1 02/2008 800 900 1000 APS3611 APPLICATION INFORMATION +5V 4.7k 0.01F 0.01F 470 nH 470 nH 330pF RFOutput1 (75Ohms) RFOUT1 GND GND 9 2 RFIN GND 8 3 GND GND 7 RFOUT2 1 GND 1.5pF 0.01F 10 IADJ RFInput (75Ohms) 10nH 11 GND GND 12 4 5 6 330pF RFOutput2 (75Ohms) Figure 12: Application Circuit PRELIMINARY DATA SHEET - Rev 1.1 02/2008 7 APS3611 PACKAGE OUTLINE Figure 13: S26 Package Outline - 12 Pin 3 mm x 3 mm x 1 mm QFN 8 PRELIMINARY DATA SHEET - Rev 1.1 02/2008 APS3611 NOTES PRELIMINARY DATA SHEET - Rev 1.1 02/2008 9 APS3611 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING APS3611RS26Q1 -5OCTO+85OC RoHSCompliant12Pin 3mmx3mmx1mm QFNPackage TapeandReel,1000piecesperReel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: [email protected] IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. warning ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 10 PRELIMINARY DATA SHEET - Rev 1.1 02/2008