ANADIGICS AWT6235RM20P8

AWT6235
WiBro 3.4V/25.5dBm
Linear Power Amplifier Module
Data Sheet - Rev 2.0
FEATURES
•
InGaP HBT Technology
•
Low ACPR:
-40 dBc @ 9 MHz Offset
-46 dBc @ 13.5 MHz Offset
•
Low Leakage Current in Shutdown Mode: <1 µA
•
VREF = +2.85 V (+2.75 V min over temp)
•
Optimized for a 50 Ω System
•
Low Profile Miniature Surface Mount Package:
1.05 mm Max
•
RoHS Compliant Package Option
AW
T62
35R
APPLICATIONS
•
M20 Package
10 Pin 4 mm x 4 mm x 1 mm
Surface Mount Module
WiBro Data Cards and Terminals
PRODUCT DESCRIPTION
The AWT6235R meets the stringent linearity and
output power requirements of the WiBro high speed
data system. The device is manufactured on an
advanced InGaP HBT MMIC technology offering stateof-the-art reliability, temperature stability, and
ruggedness. A shutdown mode with low leakage
current increases talk and standby time. The selfcontained 4 mm x 4 mm x 1 mm surface mount
package incorporates matching networks optimized
for output power, efficiency, and linearity in a 50 Ω
system.
GND at slug (pad)
10 VCC
VCC 1
RFIN 2
9
GND
GND 3
8
RFOUT
7
GND
6
GND
GND 4
Bias Control
VREF 5
Figure 1: Block Diagram
06/2007
AWT6235
GND
VCC
1
10 VCC
RFIN
2
9
GND
GND
3
8
RFOUT
GND
4
7
GND
VREF
5
6
GND
GND
Figure 2: Pinout (X-ray Top View)
Table 1: Pin Description
2
PIN
NAME
DESCRIPTION
1
VCC
Supply Voltage
2
RFIN
RF Input
3
GND
Ground
4
GND
Ground
5
VREF
Reference Voltage
6
GND
Ground
7
GND
Ground
8
RFOUT
RF Output
9
GND
Ground
10
VCC
Supply Voltage
Data Sheet - Rev 2.0
06/2007
AWT6235
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN
MAX
UNIT
Supply Voltage (VCC)
0
+5
V
Reference Voltage (VREF)
0
+3.5
V
RF Input Power (PIN)
-
+10
dBm
-40
+150
°C
Storage Temperature (TSTG)
Stresses in excess of the absolute ratings may cause permanent
damage. Functional operation is not implied under these conditions.
Exposure to absolute ratings for extended periods of time may
adversely affect reliability.
Table 3: Operating Ranges
PARAMETER
MIN
TYP
MAX
UNIT
Operating Frequency (f)
2300
-
2390
MHz
Supply Voltage (VCC)
+3.2
+3.4
+4.2
V
Reference Voltage (VREF)
+2.75
0
+2.85
-
+2.95
+0.5
V
+25.5
-
dBm
-
+85
°C
RF Output Power (POUT)
Case Temperature (TC)
+25.0
(1), (2)
-10
COMMENTS
PA "on"
PA "shut down"
The device may be operated safely over these conditions; however, parametric performance is guaranteed
only over the conditions defined in the electrical specifications.
Notes:
(1) For operation at TC = +85 oC, POUT is derated by 0.5 dB.
(2) For operation at VCC = +3.2 V, POUT is derated by 0.5 dB.
Data Sheet - Rev 2.0
06/2007
3
AWT6235
Table 4: Electrical Specifications
(TC = +25 °C, VCC = +3.4 V, VREF = +2.85 V, 50 Ω system)
PARAMETER
MIN
TYP
MAX
UNIT
Gain
26.5
29
-
dB
-
-36
-41
-47
-51
-31
-37
-42
-44
dBr
20
23
-
%
Quiescent Current (Icq)
-
75
95
mA
Reference Current
-
5.5
7
mA
through VREF pin
Leakage Current
-
<1
5
µA
VCC = +4.2 V, VREF = 0 V,
VMODE = 0 V
Harmonics
2fo
3fo, 4fo
-
-40
-40
-30
-30
dBc
Input Impedance
-
2:1
-
VSWR
Spectrum Mask (1)
@ 4.77 MHz
@ 9.27 MHz
@ 13.23 MHz
@ 17.73 MHz
Power-Added Efficiency (1)
Spurious Output Level
(all spurious outputs)
Load mismatch stress with no
permanent degradation or failure
-
-
-70
dBc
8:1
-
-
VSWR
Notes:
(1) Spectrum Mask and Efficiency measured at 2345 MHz.
4
Data Sheet - Rev 2.0
06/2007
COMMENTS
POUT = +25.5 dBm
POUT = +25.5 dBm
POUT < +25.5 dBm
In-band load VSWR < 5:1
Out-of-band load VSWR < 10:1
Applies over all voltage and
temperature operating ranges
VCC = +5.0 V, PIN = +5 dBm
Applies over full operating
temperature range
AWT6235
APPLICATION INFORMATION
To ensure proper performance, refer to all related
Application Notes on the ANADIGICS web site:
http://www.anadigics.com
Shutdown Mode
The power amplifier may be placed in a shutdown
mode by applying logic low levels (see Operating
Ranges table) to the VREF voltage.
Table 5: Bias Control
APPLICATION
WiBRO - high
power
Shutdown
POUT
LEVELS
BIAS
MODE
V REF
V CC
All
High
+2.85 V
+3.4
-
Shutdown
0V
-
Figure 3: Application Circuit Schematic
Data Sheet - Rev 2.0
06/2007
5
AWT6235
PACKAGE OUTLINE
Figure 4: M20 Package Outline - 10 Pin 4 mm x 4 mm x 1.1 mm Surface Mount Module
Figure 5: Branding Specification
6
Data Sheet - Rev 2.0
06/2007
AWT6235
COMPONENT PACKAGING
Figure 6: Tape & Reel Packaging
Table 6: Tape & Reel Dimensions
PACKAGE TYPE
TAPE WIDTH
POCKET PITCH
REEL
CAPACITY
MAX REEL DIA
4 mm x 4 mm x 1.1 mm
12 mm
8 mm
2500
13"
Data Sheet - Rev 2.0
06/2007
7
AWT6235
ORDERING INFORMATION
ORDER
NUMBER
TEMPERATURE
RANGE
AWT6235RM20P8
-10 oC to +85 oC
PACKAGE
DESCRIPTION
COMPONENT PACKAGING
RoHS Compliant 10 Pin
4 mm x 4 mm x 1.1 mm Tape and Reel, 2500 pieces per Reel
Surface Mount Module
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
E-mail: [email protected]
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without
notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are
subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are
assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges
customers to verify that the information they are using is current before placing orders.
WARNING
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS
product in any such application without written consent is prohibited.
8
Data Sheet - Rev 2.0
06/2007