Series 651000 SSOP-to-DIP Adapter FEATURES •Allows the use of 0.65mm pitch surface-mount ICs in thru-hole designs. •Ideal for prototyping and testing/evaluating SSOP ICs. •Adapter can be cut to smaller sizes by end user. •Consult factory for Panelized Form or for mounting of consigned ICs. GENERAL SPECIFICATIONS •ADAPTER BODY: FR-4, 0.062 [1.58] thick, with 1-oz. Cu traces •PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M •PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 •CURRENT RATING: 1 amp •OPERATING TEMPERATURE: 221°F [105°C] MOUNTING CONSIDERATIONS •SUGGESTED PCB HOLE SIZE: 0.028 ±0.003 [0.71 ±0.08] dia. •Will plug into standard IC socket CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION XX-651000-10-P ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED No. of Pins 14, 16, 18, 20, 24, 36 Series Optional Panelized Version Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18037 Rev. AA