20-M40-11 Thru-Hole .040 [1.02] Male DIP Strips FEATURES: • These DIP strips are used in conjunction with Aries’ Shorting Jack SJ200, available separately, for your programming needs. • ”Break” feature allows strips to be cut to any number of positions desired. SPECIFICATIONS: • Standard DIP strip body material is black UL 94V-0 Glass-filled 4/6 Nylon. • Pin is Brass Alloy 360 1/2 hard per UNS C36000 ASTM-B16-85. • Pin plating is 10 μ [.25μm] min. Gold per MIL-G-45204 over 50μ [1.27μm] min. Nickel per SAE-AMS-QQ-N-290. • Current rating=3 Amps. • Operating temperature= -67°F to 257°F [-55°C to 125°C] MOUNTING CONSIDERATIONS: • Suggested PCB hole size=.028 ± .002 [.71 ± .05] dia. ALL DIMENSIONS: Note: Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to change product specifications without notice. ORDERING INFORMATION INCHES [MILLIMETERS] Specify Part No. 20-M40-11 All tolerances ± .005 [.13] unless otherwise specified Mates with Aries’ Shorting Jacks, Part No. SJ200. Consult Data Sheet No. 16009 for details. Consult Data Sheet No. 16008 for female DIP strips. Bristol, PA USA TEL: (215) 781-9956 FAX: (215) 781-9845 abc 16007 REV. H PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED http://www.arieselec.com • [email protected]