ARIES T-0600

P/N T-0600 Strip Header/Socket
Break Tool
FEATURES
•This break tool allows user to customize header and socket strips to any number of
positions, eliminating stocking problems and providing immediate adaptability for
any length requirement to any grid or matrix pattern.
•Adjustable stop ensures consistent pin counts for production use.
•Used with Aries Pin-Line™ sockets and Strip-Line™/Pin-Line™ Headers.
CUSTOMIZATION: In addition to the standard products shown
on this page, Aries specializes in custom design and production.
Special materials, platings, sizes, and configurations can be
furnished, depending on the quantity. NOTE: Aries reserves the
right to change product general specifications without notice.
ALL DIMENSIONS: INCHES [MILLIMETERS]
ORDERING INFORMATION
Specify P/N T-0600
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
SEE DATA SHEETS 12013 & DATA SHEET 12014 FOR PIN-LINE™
SOCKET INFORMATION.
SEE DATA SHEETS 12034 & DATA SHEETS 12035 FOR STRIPLINE™/PIN-LINE™ HEADER INFORMATION.
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
Bristol, PA 19007-6810 USA
TEL (215) 781-9956 • FAX (215) 781-9845
WWW.ARIESELEC.COM • INFO@ARIESELEC.COM
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
22001
Rev. AA