plerowTM APL1810-T PLL Module Features Description ・ 3 dBm Output Level at 1810 MHz The plerowTM PLL synthesizer module was designed for use in wireless and wireline systems in a wide range of frequency from 50 MHz to 6 GHz. ASB’s PLL provides exceptionally low spurious and phase noise performance with fast locking time and low current consumption. All products are available in a surface-mount type package. ・ Channel Step Size : 25 kHz nd ・ 2 Harmonic : < -20 dBc ・ Spurious Level : < -60 dBc ・ Lock Time : < 10 ms ・ 40 mA Current Consumption Specifications Parameter Unit Min. Typical Max. Frequency Range MHz 1780 1810 1840 Output Power dBm 1 3 5 V 4.75 5 5.25 Supply Voltage Current Consumption Channel Step Size nd mA kHz 40 Website: www.asb.co.kr E-mail: [email protected] -20 Tel: (82) 42-528-7223 Fax: (82) 42-528-7222 25 2 Harmonics dBc Spurious Level dBc Lock Time ms 5 Reference Frequency (Internal) MHz 13 Reference Input Level dBm More Information -60 10 ASB Inc., 4th Fl. Venture Town Bldg., 367-17 Goijeong-Dong, Seo-Gu, Daejon 302-716, Korea Phase Noise (C / N) @ 1 kHz @ 10 kHz dBc/Hz @ 100 kHz Output Impedance Ω Operating Temp. Range °C Package Type & Size mm -70 -60 -100 -90 -120 -110 50 -40 25 85 SMT, 19.0W×19.0L×5.8H 1) Measurement conditions are as follows: T = 25°C, VCC = 5 V, Freq. = 1810 MHz, 50 ohm system. 2) Frequency stability of internal ref. TCXO is +/- 2.5 ppm (max.) over the operating temperature range. Outline Drawing 1/1 www.asb.co.kr April 2007