SO3417 / SO3417(B) Semiconductor LED Lamp Features • Orange colored transparency lens type • φ3mm(T-1)all plastic mold type • Available on tape and reel Outline Dimensions unit : STRAIGHT TYPE mm STOPPER TYPE 3.0±0.2 3.0±0.2 5.3±0.2 5.3±0.2 2.9±0.2 2.9±0.2 5.2±0.5 0.4 23.0MIN 0.4 23.0MIN 1.0MIN 1.0MIN 2.54 NOM 2.54 NOM 1 2 3.6±0.2 1 2 3.8±0.2 3.8±0.2 KLO-3000-000 3.6±0.2 PIN Connections 1.Anode 2.Cathode 1 SO3417 / SO3417(B) Absolute maximum ratings Characteristic Symbol Ratings Unit Power Dissipation PD 85 mW Forward Current IF 30 mA IFP 50 mA Reverse Voltage VR 4 V Operating Temperature Topr -35∼85 ℃ Storage Temperature Tstg -40∼100 ℃ 1 * Peak Forward Current 2 260℃ for 5 seconds * Soldering Temperature Tsol *1.Duty ratio = 1/10, Pulse width = 0.1ms *2. Keep the distance more than 2.0mm from PCB to the bottom of LED package ℃ Electrical Characteristics Characteristic Symbol Test Condition VF IF= 20mA - 2.0 2.7 V *3Luminous Intensity IV IF= 20mA 27 64 100 mcd Peak Wavelength λP Δλ IR IF= 20mA - 615 - nm IF= 20mA - 35 - nm VR=4V - - 10 uA θ1/2 IF= 20mA - ±22 - deg Forward Voltage Spectrum Bandwidth Reverse Current *4 Half angle Min. Typ. Max. Unit *3. Luminous Intensity Maximum tolerance for each Grade Classification limit is ±18% *3. Luminous Intensity classification I J K 27~43 43~68 68~100 *4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity KLO-3000-000 2 SO3417 / SO3417(B) Characteristic Diagrams Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 1 IF - VF Forward Voltage VF [V] Forward Current IF [mA] Fig.4 Spectrum Distribution Forward Relative Intensity [%] Current IF [mA] Fig. 3 IF – Ta Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KLO-3000-000 3