SA3411 / SA3411(B) Semiconductor LED Lamp Features • Red Colored transparency lens type • φ3mm(T-1) all plastic mold type • Low power consumption Outline Dimensions unit : mm STRAIGHT TYPE STOPPER TYPE 3.0±0.2 3.0±0.2 4.0±0.2 4.0±0.2 5.0±0.2 5.0±0.2 5.5±0.5 0.5 25.0 MIN 0.5 25.0 MIN 1.0 MIN 1.0 MIN 2.54 NOM 2.54 NOM 12 12 3.8±0.2 3.8±0.2 PIN Connections 1.Anode 2.Cathode KLA-0003-000 1 SA3411 / SA3411(B) Absolute maximum ratings Characteristic Symbol Ratings Unit Power Dissipation PD 85 mW Forward Current IF 30 mA IFP 50 mA Reverse Voltage VR 4 V Operating Temperature Topr -25～85 ℃ Storage Temperature Tstg -30～100 ℃ Tsol 260℃ for 5 seconds *1Peak Forward Current 2 * Soldering Temperature *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical Characteristics Characteristic Symbol Test Condition Min Typ Max Unit Forward Voltage VF IF= 20mA - 2.0 2.7 V Luminous Intensity IV IF= 20mA - 65 - mcd λP Δλ IR IF= 20mA - 630 - nm IF= 20mA - 35 - nm VR=4V - - 10 uA θ1/2 IF= 20mA - ±17 - deg Peak Wavelength Spectrum Bandwidth Reverse Current * Half Angle 3 *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity KLA-0003-000 2 SA3411 / SA3411(B) Characteristic Diagrams Fig. 1 IF - VF Forward Luminous Intensity Iv [mcd] Current IF [mA] Fig. 2 IV - IF Forward Voltage VF [V] Forward Fig.4 Spectrum Distribution Forward Relative Intensity [%] Current IF [mA] Fig. 3 IF – Ta Current IF [mA] Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity [%] KLA-0003-000 3