AZ2300 20 AMP MINIATURE POWER RELAY FEATURES • • • • • • Low cost 20 Amp switching 55 Amp inrush current Class B insulation system Quick-connect terminals UL, CUR file E44211 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Max. switched power: 450 W or 3300 VA Max. switched current: 20 A Max. switched voltage: 150* VDC or 400 VAC * If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. UL, CUR NO: 15 A at 220 VAC (100 k operations) NC: 10 A at 220 VAC (100 k operations) Material Silver cadmium oxide Resistance < 50 milliohms initially (24 V, 1 A voltage drop method) COIL Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 15 A 220 VAC Res. Operate Time (typical) 15 ms at nominal coil voltage Release Time (typical) 10 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 3000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 500 VDC, 20°C 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 130°C (266°F) Vibration 0.062" DA at 10–55 Hz Shock Power At Pickup Voltage (typical) 441 mW Max. Continuous Dissipation 1.65 W at 20°C (68°F) ambient 1.35 W at 40°C (104°F) ambient Temperature Rise 60°C (108°F) at nominal coil voltage Temperature Operating 20 g, 11 ms 1/2 sine (no false operation) Non-operating 100 g, 11 ms 1/2 sine (no damage) Enclosure P.B.T. polyester Terminals Tinned copper alloy Quick-connect Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Max. 130°C (266°F) Class B NOTES 1. All values at 20°C (68°F). Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Weight 40 grams 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 5/25/05W AZ2300 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 6 Must Operate VDC 4.2 ORDER NUMBER Max. Continuous VDC 8.0 Coil Resistance ±10% 40 Form A Form C AZ2300–1A–6D AZ2300–1C–6D 12 8.4 16.2 160 AZ2300–1A–12D AZ2300–1C–12D 24 16.8 32.0 640 AZ2300–1A–24D AZ2300–1C–24D 48 33.6 64.0 2,560 AZ2300–1A–48D AZ2300–1C–48D 0.020 (.5) 2 pl 0.177 (4.5) MECHANICAL DATA 3 Com 2 1 4 NO 5 NC 1.26 max. (32 max.) WIRING DIAGRAM (Top View) (SPDT shown) 1.52 (38.5) ø0.176 ø(4.5) 2 pl 1.89 max. (48 max.) 0.079 (2.0) ø0.065 ø(1.65) 3 pl 0.100 (2.5) 3 pl 0.185 (4.7) 3 pl 0.315 (8.0) 3 pl 0.187 (4.75) 2 pl 0.250 (6.35) 3 pl 0.082 (2.1) 2 pl 0.748 max. (19 max.) 0.079 (2.0) 0.032 (0.8) 3 pl 0.240 (6.0) 2 pl 1.52 (38.5) 1.22 max. (31 max.) Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 5/25/05W