BOE100 TO18 Plastic IR Emitter FEATURES • Min/max radiated power density selection. • Good optical to mechanical alignment • High radiance level. • Coloured body gives easy recognition from Phototransistor. MECHANICAL DATA DESCRIPTION The BOE100 is a 880nm AlGaAs LED encapsulated in a clear,purple tinted plastic TO46 package Do Not Scale 4.67 ±0.15 5.59 ±0.25 REFERENCE SURFACE 0.76 NOM CATHODE 20.3 MIN ANODE 1.27 NOM NOTES 1. DIMENSIONS mm 2. TOLERANCE +/- 0.25 UNLESS STATED 3. TAB DENOTES CATHODE 2.54 NOM 0.5 SQ NOM 5.46 ±0.25 45° BEDFORD OPTO TECHNOLOGY LTD 1.BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] PAGE 1 ISS A 15.4.02 R0.56 BOE100 TO18 Plastic IR Emitter ABSOLUTE MAXIMUM RATINGS (25oC unless otherwise noted) STORAGE TEMP -40 C TO +100oC OPERATING TEMP -40 C TO 100oC 100mA CONTINUOUS FORWARD CURRENT REVERSE VOLTAGE 5.0V POWER DISSIPATION 200mW (1) 240oC for 5secs(2,3,5) LEAD SOLDERING TEMPERATURE (Iron) 260oC for 10secs LEAD SOLDERING TEMPERATURE9(Flow) OPTO ELECTRONIC DATA(Ta=25oC unless stated) PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDISTIONS Forward Voltage Vf 1.70 V If = 20mA Reverse leakage Current Ir 10 μA Vr=5.0V Peak Emission Wavelength λp 880 nm If=20mA Emission Angle at ½ Radiated Power Density. Θ ±35 deg Radiant incidence EΘ 16 26 mW/sqcm If=100mA(6,7) NOTES o BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] PAGE 2 ISS A 15.4.02 o 1. Derate power dissipation linearly at 2.7mW/ C above 25 C. 2. RMA flux is recommended. 3. Methonal or Isopropylalcohols are recommended as cleaning agents. 4. Solder iron tip 1.6mm minimum from housing. 5. Leads not to be under stress or tension. 6. Measurment taken at the end of a 100μS pulse. 7. EΘ is a measure of the average apertured radiant energy incident upon a sensing area 6.35mm diameter perpendicular to and centred on the mechanical axis of the lens and 10.7mm from the measurement surface.Eθis not necessarily uniform within the measurement area.