OPI1264 Series Optically Coupled Isolators This component is RoHS compliant Pb ATEX &IECEx CERTIFIED The OPI1264A/B/C/D are a family of optically coupled isolators,each consisting of a infrared light emitting diode, coupled to an NPN silicon phototransistor sealed in an injection moulded plastic housing.This series is designed for applications requiring high voltage isolation between input and output. All electrical parameters are 100% tested by manufacturing. Specifications are guaranteed to a 0.65% AQL • 10KV electrical rating High current transfer ratio-100%min @1mA CERTIFICATE IECEx BAS 06.0021U/1 CERTIFICATE BAS01ATEX1278U/2 Designed and manufactured to:IEC 60079-0: 2000 Edition 3.1 IEC 60079-11 :1999 Edition 4 IEC 60097-26 :2004 Edition 1 Conditions of use apply:- See ‘Schedule of limitations’ on certificate. Confirmed conform to:EN60079-0:2006 EN61241-0:2006 EN60079-11:2007 EN61241-11:2006 EN60079-26:2004 Conditions of use apply:- See ‘Schedule of limitations’ on certificate MECHANICAL DATA 13.9 12.7 7.62 min 5.84 5.59 LED Anode Polarity(Pin1) Marking Slot (1) (4) 2.54 (3) (2) Ø6.6 6.1 (1) (4) (2) (3) BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 1/4 ISS I 21.07.08 OPI1264 This component is RoHS compliant Pb ABSOLUTE MAXIMUM RATINGS (25 °C unless otherwise noted) INPUT DIODE FORWARD DC CURRENT REVERSE DC VOLTAGE POWER DISSIPATION 50mA (3) 2V 100mW (4) OUTPUT PHOTOTRANSISTOR COLLECTOR-EMITTER VOLTAGE EMITTER-COLLECTOR VOLTAGE POWER DISSIPATION 30 V 5V 100 mW (5) OPERATING TEMP -40OC TO +85OC STORAGE TEMP -40OC TO +85OC INPUT-TO-OUTPUT ISOLATION VOLTAGE LEAD S0LDERING TEMP (2) 1.6mm from case for 5sec with +10KV DC (1) 240OC soldering iron NOTES 1 Measured with input diode leads shorted together and output leads shorted together. 2 RMA Flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. 3 Derate linearly 0.73 mA/OC above 25OC 4 Derate linearly 1.67 mW/OC above 25OC 5 Derate linearly 1.67 mW/OC above 25OC Whilst the devices are capable of operating continually at the noted elevated temperatures users should be aware of the possibility of a reduction in CTR over long periods at high temperatures & currents. BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 2/4 ISS I 21.07.08 OPI1264 This component is RoHS compliant OPTO ELECTRONIC DATA (TA = 25OC) PARAMETER SYMBOL MIN TYP Pb MAX UNITS TEST CONDISTIONS INPUT DIODE Forward Voltage VF 1.5 V If = 20mA Reverse Current IR 100 µA Vr = 2V OUTPUT PHOTOTRANSISTOR Collector-Emitter Breakdown Voltage V(BR)CEO 30 V Ic = 1mA If = 0 Emitter-Collector Breakdown Voltage V(BR)ECO 5 V Ie = 100µA nA Vce = 10V Collector-Emitter Dark Current 100 ICEO COUPLED CHARACTERISTICS DC Current transfer ratio IC/IF OPI1264A 25 % If=10mA Vce=5V OPI1264B 50 % If=10mA Vce=5V OPI1264C 100 % If=10mA Vce=5V OPI1264D 100 % If=1mA, Vce=5V 10 KV See Note V If=10mA, Ic=1.6mA Isolation Voltage VISO Collector-emitter saturation voltage 0.4 VCE(SAT) Turn-on time t on 5 µS Ic=10mA, Vcc=10V, RL=100ohm Turn-off time t off 5 µS Ic=10mA, Vcc=10V, RL=100ohm NOTE: Measured with input diode leads shorted together and output leads shorted together. (Sample testing only). BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 3/4 ISS I 21.07.08 OPI1264 CONFORMITY STATEMENT OPI1264 SERIES This component is RoHS compliant Pb Manufacturer:- BEDFORD OPTO TECHNOLOGY LTD Address:1 Biggar Business Park, Market Road, Biggar, Lanarkshire, ML12 6FX, Scotland Directive 94/9/EC EC-Type Examination Certificate:BAS01ATEX1278U – Latest supplement BAS01ATEX1278U/2 issued 30.10.07 Provisions of the Directive fulfilled by the component:GroupII Category 1GD EexiaIIC Notified Body for EC-Type Examination & Production:- BaseefaLtd. – No. 1180 Baseefa Ltd. Rockhead Business Park, Staden Lane, Tel:- +44 (0)1298 766600 Buxton, Fax:- +44 (0)1298 766601 Derbyshire SK17 9RZ, e-mail:- [email protected] England Harmonised Standards used:EN60079-0:2006 EN60079-11:2007 EN61241-11:2006 Other Standards used:EN60079-26:2004 – (confirmed by Notified Body unit complies in all re spects) EN61241-0:2006 – (State of the Art – intended for harmonisation) On Behalf of Bedford Opto Technology Ltd., I declare that, the date the component accompanied by this statement is placed on the market, the component conforms with all technical and regulatory rerquirements of the ATEX Directive 94/9/EC. _________________________________ Mr R.W.Stott Managing Director 4/4 ISS I 21.07.08