RJ45+USB STACK w/LED & TRANSFORMER MODULE F TYPE P/N:LU1S516C A. General Specifications: 1.SCOPE 1.1 Content 1.1.1 This specification covers performance , tests and quality requirements for RJ45+USB STACE w/LED & TRANSFORMER MODULE F TYPE 2.APPLICABLE DOCUMENTS The following documents form a part of this specification to the extent specified herein unless otherwise Specified latest edition of the specification applies ,In the event of conflict between requirements of this Specification and product drawing product drawing shall take precedence 2.1 Commercial standards specifications and report 2.1.1 MIL-STD-1344A & 2.1.2 EIA-364 B. Electrical Specifications@25°C: 1. Insertion Loss ( 1 to 100 MHz) : -1.0 dB Max 2. Return Loss(load 100Ω) : 1-30MHz -18 dB Min 3. Cross talk (1-100 MHz): 30-60MHz 60-80MHz -16 dB Min -12 dB Min 35 dB Min 4. Common mode rejection (1-100MHz): 30dB Min 5. Inductance: 350 uH Min @100KHz/0.1v with 8mA/DC bias , Input(1-2), Input(3-6) 5. HI TO TEST: Input(1-2)to output(1-2) : 1500v/60sec & Input(3-6)to output(3-6) : 1500v/60sec Prepared :Luo Ming Li Approved: Xu Wenbinhg Date : 2001/05/22 Drawing no.: Pulse Transformer REV.:A0 Page : 1/2 D. Mechanical & Schematic : Prepared :Luo Ming Li Approved: Xu Wenbinhg Date : 2001/05/22 Drawing no.: Pulse Transformer REV.:A0 Page : 2/2