Bothhand USA email:[email protected] tel: 978-887-8050 “LAN-MATE” SERIES 1X4 RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS P/N: LU4Y041X LF Page : 1/2 Feature l l RJ-45 needs to be matched FCC standard. RJ-45 connector integrated with X’FMR / Impedance Resistor/High Voltage Capacitor. l Size same as RJ-45 connector to save PCB board pace. l l l Reduced EMI radiation to improve EMI performance. Design for 100 base transmission over UTP-5 CABLE. Lead free for external pins. l Comply with RoHS requirements-whole part No Cd, No Hg, No Cr6+, No PBB and PBDE and No Pb on external pins. l l Operating temperature range: 0℃ to +70℃. Storage temperature range: -25℃ to +125℃. Electrical Specifications @ 25°C Part Turns Ratio OCL (uH Min ) (±5%) @100KHz/0.1V Number TX RX with 8mA DC Bias LU4Y041X LF 1CT:1CT 1CT:1CT CW/W L.L (pF Max) (uH Max) Insertion Loss (dB Max) HI-POT (Vrms) 0.3-100MHz 350 56 0.5 -0.8 1500 Continue Part Number Return Loss Cross talk CMR (dB Min) TX/RX (dB Min) (dB Min) 30MHz 40MHz 50MHz 60MHz 80MHz 0.3-30MHz 30-60MHz 60-100MHz 1-30MHz 30-60MHz 60-125MHz LU4Y041X LF -16 -14 -13.5 -13 -10 -40 -35 -30 -30 -25 -20 Schematic 462 Boston St, Topsfield, MA 01983 http://www.bothhandUSA.com email:[email protected] A 1(08/ 01) tel: 978-887-8050 fax: 978-887-5434 Bothhand USA email:[email protected] tel: 978-887-8050 “LAN-MATE” SERIES 1X4 RJ45 CONNECTOR MODULE WITH INTEGRATED 10/100 BASE-TX MAGNETICS P/N: LU4Y041X LF Page : 2/2 Mechanical ﹗ 1. Plastic Material : Thermoplastic (UL 94V-0), Black Housing 2. Metal Shield : Brass, 20u" inches thick Nickel 3. Spring Wire : Phosphor bronze with selective gold plating 4. Solder Pin : 0.4x0.4mm, Phosphor bronze with solder Plated 5. Durability : 300 Mating cycles Min. PCB Layout Mounting Hole(Top View) 462 Boston St, Topsfield, MA 01983 http://www.bothhandUSA.com email:[email protected] A 1(08/ 01) tel: 978-887-8050 fax: 978-887-5434