SSA 187/L SERIES 3 TIER 3mm LED ASSEMBLY The SSA 187 series is a family of display devices using a Black Nylon 6 UL-94VO rated housing to mount three 3mm LEDs at right angles to a PCB. The pin out is in line on 0.1” . In any one batch the LEDs are lumenous intensity matched. • Accurate alignment of LEDs. • Low current and high brightness available. • Unique Baseplate for accurate lead positioning. • Matched LEDs. • Blue also available. • Near equivalent to Dialight 564-0X20-XXX MECHANICAL DATA This component is RoHS compliant 1.2 Ø2.80 Pb 12.5 4.9 6.0 X 5.08 15.3 Y 5.08 Z 2.57 3.3 + 0.5 SQUARE 3.2 7.25 2.54 RED ANODE FOR RED/GREEN BI-COLOUR 2.54 5.08 BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] PAGE1 OF 3 ISS C 14.3.06 ABSOLUTE MAXIMUM RATINGS (TA = 25OC) Parameter SSA 187 Red Soft Yellow Green Pure Red Forward Current 30mA 30mA 30mA 30mA 30mA 3omA Power Dissipation 100mW 100mW 100mW 100mW 100mW 100mW 6 6 6 6 6 10μA Reverse Voltage volts Operating Temperature -40°C to +100°C Storage Temperature -55°C to 100°C Lead Soldering Temperature for 5sec (2.0mm from Body) 260°C OPTO ELECTRONIC DATA (Ta = 25oC) Lumenous Intensity If = 10mA mcd Peak Wavelength nm Viewing Angle Degrees Forward Voltage If = 20mA volts min typ 6.3 10 635 60 2.0 Min Typ 1.6 4.0 605 60 2.4 min typ 6.3 10 585 60 2.4 min typ max 6.3 10 565 - 60 - 2.4 3.0 PURE GREEN min typ max 1.6 3.5 555 - 60 - 2.4 3.0 RED Min Typ Max Min Typ Max 2.2 @20mA 4.8 @20mA 630 200 2.0 2.8 2.2 @20mA 4.8 @20mA 565 200 2.1 2.8 COLOUR RED SOFT ORANGE YELLOW GREEN GREEN BI- This component is RoHS compliant Pb ORDERING INFORMATION SSA187XYZ X = Top LED Indicate colour by using R = Red B = Blank Y = Middle LED Z = Bottom LED O= Orange Y = Yellow G = Green PG= Pure Green BC=Red/Green Bi-colour BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] PAGE 2 OF 3 ISS C 14.3.06 SSA 187L LOW CURRENT VERSIONS ABSOLUTE MAXIMUM RATINGS (TA = 25OC) Parameter Red Green Yellow Forward Current mA 7.0 7.0 7.0 20mW 20mW 20mW 6 6 6 Power Dissipation Reverse Voltage volts Operating Temperature -40°C to +100°C Storage Temperature -55°C to 100°C This component is RoHS compliant Pb 260°C Lead Soldering Temperature OPTO ELECTRONIC DATA (Ta = 25oC) COLOUR Lumenous Intensity If = 2mA mcd Peak Wavelength nm Viewing Angle Degrees Forward Voltage If = 2mA volts RED min typ 1.0 2.0 635 50 1.9 YELLOW min typ 1.0 2.0 585 50 2.4 min typ max 1.0 2.0 565 - 50 - 1.9 2.4 GREEN ORDERING INFORMATION SSA187LXYZ X = Top LED Indicate colour by using R = Red B = Blank Y = Middle LED Z = Bottom LED Y = Yellow G = Green BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] ISS C 14.3.06 PAGE 3 OF 3