This component is RoHS compliant SSA 200 SERIES 3 TIER Pb The SSA 200 series is a family of display devices using a Black Nylon 6 VO rated housing to mount three 3mm LEDs at right angles to a PCB. The pin out is in line on 0.1” . In any one batch the LEDs are lumenous intensity matched. • • • • • Accurate alignment of LEDs. Low current and high- bright available. Unique Baseplate for accurate lead positioning. Matched LEDs. Shrouded LED to reduce cross talk. MECHANICAL DATA 13.18 4.32 0.85 5.08 16.24 3.2 +0.2/-0.0 5.08 3.54 3.2 +/-0.25 2.54 2.54 0.5 SQUARE 2.54 6.2 BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 17.2.00 ISS A SSA 200 ABSOLUTE MAXIMUM RATINGS (TA = 25OC) Parameter Red Green Yellow Orange RED GREEN Forward Current 15mA 30mA 20mA 30mA 30mA Power Dissipation 40mW 100mW 60mW 100mW 100mW Reverse Current @ 5V 10μA 10μA 10μA 10μA 100μA Operating Temperature -40°C to +85°C Storage Temperature -40°C to 100°C 260°C Lead Soldering Temperature for 5sec (2.0mm from Body) OPTO ELECTRONIC DATA (Ta = 25oC) Lumenous Intensity If = 10mA mcd Peak Wavelength nm Viewing Angle Degrees Forward Voltage If = 20mA volts min typ max 2.0 4.2 - 697 - 50 - 1.7 2.8 YELLOW min typ max 7.5 12 - 585 - 50 - 1.7 2.8 GREEN min typ max 9.0 15 - 565 - 50 - 1.7 2.8 ORANGE min typ max 7.5 12 - 635 - 50 - 1.7 2.8 Min Typ Max Min Typ Max 2.2 @20mA 4.8 @20mA 630 200 2.0 2.8 2.2 @20mA 4.8 @20mA 565 200 2.1 2.8 COLOUR RED RED GREEN BI-COLOUR ORDERING INFORMATION Dual LED - SSA200XYZ X = Top LED Indicate colour by using R = Red Y = Yellow G = Green Y = Middle LED Z = Bottom LED O = Orange B = Blank B/C=Red Green Bi-colour This component is RoHS compliant Pb BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: [email protected] 17.2.00 ISS A