Bright View Electronics FLEXSTRIP LIGHT BVM-SF5C01 SERIES ■ DESCRIPTION Flexstrip Light is high brightness SMD LED mounted on FPC. Six colors (red, orange red, yellow, green, blue and white) are available for variable applications. Bright View provides functions of brightness dimmable and color changeable control system. ■ FEATURES Number of built-in SMD LEDs : 330 pcs of ultra bright SMD LED Product size (LxWXH) : 8250mm x 10mm x 2.6mm(with adhesive-tape back) Smallest unit (125mm) of 5 LEDs can be cut at mark place Continuous length flexible LED light strips , total 66 units per reel Low power consumption, high intensity Runs on DC 24 volt power supply Lead (Pb) free, and RoHS compliant ■ APPLICATIONS Amusement park & theater mood lighting Architectural decorative lighting Backlighting for signage letters Auditorium walkway lighting Stairway accent lighting Hallway lighting Date：2008/09/22 Page ：1 of 5 Version-A Bright View Electronics FLEXSTRIP LIGHT BVM-SF5C01 SERIES Unit : mm ■ PRODUCT DIMENSIONS 8250 125 125 5.2 5.2 25 25 25 25 12.5 3 10 3 5.2 SOLDER PAD 3M Tape 2.6 SOLDER PAD 0.7 SOLDER PAD ■ PART NUMBERING SYSTEM B V M - S F 5 C 0 1 W3S-A LED Color Code Product Code LED Module Date：2008/09/22 Page ：2 of 5 Version-A Bright View Electronics FLEXSTRIP LIGHT BVM-SF5C01 SERIES ■ ABSOLUTE MAXIMUM RATINGS AT Ta = 25 ℃ PARAMETER Maximum Operating Voltage Electrostatic Discharge (Contact Model) Power Dissipation / Reel Operating Temperature Range Storage Temperature Range MAX. 25 ±2000 33 －30 ℃ to ＋65 ℃ －30 ℃ to ＋85 ℃ UNIT V DC V DC W *The operating temperature measured position is on the back of the PCB. ■ TYPICAL ELECTRICAL / OPTICAL CHARACTERISTICS AT 24VDC Ta = 25 ℃ Part No. BVM-SF5C01B3S BVM-SF5C01G3S BVM-SF5C01R3S BVM-SF5C01O3S BVM-SF5C01Y3S BVM-SF5C01W3S-A BVM-SF5C01W3S-B BVM-SF5C01W3S-C BVM-SF5C01W3S-D Date：2008/09/22 Color Blue Green Red Orange Yellow White White White White View Angle (degree) Wavelength/CCT 110 110 110 110 110 110 110 110 110 470 525 625 605 589 2500-2800 3200-3500 3500-3800 6300-7000 λd (nm)/。K Page ：3 of 5 Current Current Lum.Flux Lum.Flux per Unit (mA) per Reel (A) per Unit (lm) per Reel (lm) 20 20 20 20 20 20 20 20 20 1.32 1.32 1.32 1.32 1.32 1.32 1.32 1.32 1.32 2.5 7.0 5.5 3.5 7.0 16.5 16.5 16.5 16.5 160 448 352 224 448 1050 1050 1050 1050 Version-A Bright View Electronics FLEXSTRIP LIGHT BVM-SF5C01 SERIES ■ PACKING P ART N O.: L O T NO .: G RA DE : Q 'ty p cs QA E LE CT RO S TA TIC S EN SITIVE DEV ICES DO N OT O PE N O R HA NDLE EX CE PT A T A S TA T IC-F RE E W ORK STA TION 23 Bright View E lectronics C o.,Ltd. PART NO .: LO T NO .: G RADE: QA Q 'ty Pb-Free / RoHS Compliant ELECTRO STATIC SENSITIVE DEVICES DO NO T OPEN OR HANDLE EXCEPT AT A STATIC-FREE W O RKSTATIO N 22 Anti-electrostatic bag 24 Carton : 20 Reels 39 26 RE ITEM NO. DEVICE: Q'TY N. W .: G . W .: Date：2008/09/22 PCS. KGS. KG S. Y CARTON Dim ension(cm ): 39 x 24 x 26 Page ：4 of 5 Version-A Bright View Electronics FLEXSTRIP LIGHT BVM-SF5C01 SERIES ■ CAUTIONS 1. Solder connection should only be performed on designated solder pads(marked +/-). During soldering, do not execeed the maximum soldering time of 10 seconds and the maximum soldering temperature of 260℃. 2. Correct electrical polarity needs to be observed. Wrong polarity may destroy the LED module. 3. When using power supply the following basic safety features are required, in additional to any other specific application concerns and local safety codes: ﹒overload protection ﹒short circuit protection ﹒over heat protection ﹒correct output voltage, including consideration for ripple and spikes 4. Make ensure that the power supply is of adequate power to operate the total load. 5. When mounting on metallic surface, there needs to be a electrical isolation between module and the mounting surface. 6.Customer's desired lengths of minimum 125mm and its multiple can be made by breaking at the cutting mark of the LED strip. 7.This product is not waterproof and precaution should be taken to keep from exposure to moisture. 8.The FPC (No. BVM-SP5 Series) can be operated at maximum length of 8 meter. 9.Pay attention to standard ESD precautions when installing the LED module. Date：2008/09/22 Page ：5 of 5 Version-A