Bright View Electronics RGB LED STRIP LIGHT BVM-SFRGB5C01 series ■ DESCRIPTION - Strip light is made of high brightness SMD LEDs mounted on rigid printed circuit (PCB). White lights with red, green and blue LED integrated are available for various applications. - Bright View provides full color spectrum controller, please refer to the specifications of BVM-FSCC . - Bright View also provides connectors ■ FEATURES - Number of SMD LEDs : 198 pcs of ultra bright RGB SMD LEDs Product size (LxWXH) : 3050mm x 9.5mm x 3.2mm (without connector) Easy installation with connector Drive: 24VDC/18mA - Shortest unit is 169mm with 11 LEDs. - Low power consumption and high optical intensity - Lead (Pb) free, and RoHS compliant ■ APPLICATIONS - Decorative & Entertainment Lighting Tube Light Source & LED Strip Light Architectural Lighting General Lighting Date：2008/06/10 Page：1 of 5 Version-C Bright View Electronics RGB LED STRIP LIGHT ■ PRODUCT DIMENSIONS BVM-SFRGB5C01 series Unit：mm 3050 SOLDER PAD SMD LED SMD Driver IC SMD Zener Diode ■ PART NUMBERING SYSTEM B V M - S FRGB 5 C 01 Version Driving current type Operating Voltage Code Color Code Product Code LED Module Date：2008/06/10 Page：2 of 5 Version-C Bright View Electronics RGB LED STRIP LIGHT BVM-SFRGB5C01 series ■ ABSOLUTE MAXIMUM RATINGS AT Ta = 25 ℃ PARAMETER Power Dissipation Operating Voltage (maximum) Electrostatic Discharge (Contact Mode) Operating Temperature Range Storage Temperature Range MAX UNIT 48.8 25 ±2000 －30 ~ ＋50 －30 ~ ＋85 W V V ℃ ℃ ■ TYPICAL ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta = 25 ℃ SYMBOL PARAMETER V λp λd 2θ1/2 I I Φ Φ Light Color Operating Voltage (length<= 3000 Peak Emission Wavelength Dominant Wavelength LED Viewing Angle Operating Current/Unit (typ.) Operating Current/Reel Illuminance /Unit Luminous Flux/Unit Date：2008/06/10 BVM-SFRGB5C01 Red 633 625 120 36 0.36 45 29 Page：3 of 5 Green 24 520 525 120 36 0.65 80 35 Unit Blue 462 465 120 36 0.65 7 22 V nm nm deg. mA A lx lm Version-C Bright View Electronics RGB LED STRIP LIGHT ■ PACKING BVM-SFRGB5C01 series Unit : cm PART N O.: LOT NO.: GR ADE: Q'ty pcs QA E LEC TR OSTATIC SEN SITIVE D EVIC ES DO NOT OPEN OR H AN DL E EX CEPT A T A S TATIC- FREE W OR KSTATION 23 Bright View Electronics Co.,Ltd. PART NO.: LOT NO.: GRADE: QA Q'ty Pb-Free / RoHS Compliant ELECTROSTATIC SENSITIVE DEVICES DO NOT OPEN OR HANDLE EXCEPT AT A STATIC-FREE WORKSTATION 22 Anti-electrostatic bag 24 Carton : 20 Reels 39 26 RE Date：2008/06/10 ITEM NO. DEVICE: Q'TY N. W.: G. W.: PCS. KGS. KGS. Y CARTON Dimension(cm): 39 x 24 x 26 Page：4 of 5 Version-C Bright View Electronics RGB LED STRIP LIGHT BVM-SFRGB5C01 series ■ CAUTIONS 1. Over voltage A. Drive the product over the specified voltage rating (25VDC) per unit or per strip will damage the product. B. The product should not be used in reverse polarity. C. It is recommended to use a power supply with overload (over-voltage, short circuit and overheat) protection. 2. Hand soldering A. It is recommended to use a tip temperature of 280 OC for less than 3 seconds (one times) with a soldering iron capacity of 30W, if hand soldering of the connecting wire is required. B. Be careful of the contaminations of hand soldering. 3. Storage & Handling A. Open the anti-electrostatic bag only a short time before use. B. LED is encapsulated with elastic resin and will be damaged with a external force applied on the top surface of the LED. C. The product should be storage in an environment with the relative humidity less than 90% RH (@30 degree C or less). D. During installation, excess mechanical stress will damage the product. The minimum bending radius of curvature is 5000mm. The maximum twist angle is 1 degree. E. The product is not waterproof. Excess moisture may also damage the product. Date：2008/06/10 Page：5 of 5 Version-C