CAMBION Wearnes Cambion LTD â Castleton, Hope Valley, Derbyshire, S33 8WR, England Telephone: +44(0)1433 621555 Fax: +44(0)1433 621290 Web: www.cambion.com Email: [email protected] Technical Data Sheet 400-1803, "PP3" size Battery Holder - PC mount Rec. Mounting Holes - .062 (1,57) Dia., on pitch of 0.500 (12,70) centres, plus bolt down holes per drawing Suited for use on boards up to .125 (3,18) thick How to order code 400-1803-01-00-20 Basic Part No FEATURES Single Piece Construction Requires No Snap on Battery Connection Shockproof Battery Retention Insertion Removal BATTERY INSERTION/REMOVAL PROCEDURE Pull back moulded clip part of holder, and slide flat end of battery down into the holder. Drop contact end of battery into position, and release clip Pull back moulded clip part of holder, and lift battery out of holder, contact end first. Component Body Spring and Solder Tail Material PBT Phosphor Bronze Finish Colour - Natural Electro Tin Mechanical tolerance unless otherwise stated ±.010(0,25) Copyrightď›™ Cambionâ Wednesday, 14 November 2001 Page 1 of 1