KBPC10 SERIES CHENG- YI SINGLE-PHASE GLASS BRIDGE ELECTRONIC VOLTAGE RANGE 50 TO 1000 VOLTS PRV CURRENT 10 Amperes FEATURES Surge overload rating-200 amperes peak Low forward voltage drop Mounting Position: Any Electrically isolated base-1800 Volts Solderable .25" FASTON terminals Materials use carries U/L recognition MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 250C ambient temperature unless otherwise specified. Resistive or inductive load, 60 Hz. For capacitive load, derate current by 20%. KBPC10005 KBPC1001 KBPC1002 KBPC1004 KBPC1006 KBPC1008 KBPC1010 UNITS 200 400 600 800 1000 V Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Output Current @ TC=55 C V(AV) 10 A Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load(JEDEC Mehtod) IFSM 200 A Maximum DC Forward Voltage drop per element at 7.5A DC VF 1.2 V 0 Maximum DC Reverse Current at rated DC Blocking Voltage @ TA=250C IR @ TA=1000C 2 2 I t Rating for fusing (t<8.3ms) Typical Thermal Resistance(Note.1) Operating Temperature Range Storage Temperature Range I t R JC 100 A 10 1 A 2 373 2.5 AS 0 C/W TJ -55 to +125 0 TSTG -55 to +150 0 C C KBPC10 SERIES CHENG- YI SINGLE-PHASE GLASS BRIDGE ELECTRONIC RATING AND CHARACTERISTICS CURVES KBPC10 SERIES Fig.2 - DERATING CURVE FOR Fig.1 - MAXIMUM FORWARD SURGE CURRENT 250 200 150 100 50 0 1 10 100 AVERAGE FORWARD OUTPUT CURRENT AMPERES PEAK FORWARD SURGE CURRENT.(A) 300 OUTPUT RECTIFIED CURRENT 20 15 10 5 0 50 TEMPERATURE, 0 C NUMBER OF CYCLES AT 60 Hz Fig.3 - TYPICAL FORWARD CHARACTERISTICS Fig.4 - TYPICAL REVERSE CHARACTERISTICS 100 10 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT. AMPERES 150 100 1.0 0.1 1.0 TJ=250C 0.1 .01 0 .01 .4 .6 .8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE 120 140