RS2501 thru RS2507 SINGLE-PHASE SILICON BRIDGE RECTIFIER CHENG- YI ELECTRONIC VOLTAGE RANGE -50 to 1000 Volts CURRENT 25 Amperes FEATURES Low leakage Low forward voltage Mounting position:Any Surge overload rating:300 amperes peak Siliver-plated copper leads MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. MAXIMUM RATINGS ( At TA=25 C unless otherwise noted) 0 Ratings Symbol RS2501 RS2502 RS2503 RS2504 RS2505 RS2506 RS2507 Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Bridge Input Voltage VRMS 35 75 140 280 420 Maximum DC Blocking Voltage VDC 50 100 200 400 600 Maximum Average Forward Output Current at Tc=500C 100 200 400 600 800 UNITS 1000 Volts 560 700 Volts 800 1000 Volts IO 25 Amps IFSM 300 Amps TJ TSTG -55 to +150 Maximum Forward Voltage Drop per element at 12.0A DC VF 1.0 Maximum Reverse Current at Rated @TA=250C DC Blocking Voltage per element @TC=1000C IR Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load Operating and Storage Temperature Range 0 C Volts 10 Amps 0.2 mAmps RS2501 thru RS2507 CHENG- YI SINGLE-PHASE SILICON BRIDGE ELECTRONIC RATING AND CHARACTERISTICS CURVES RS2501 THRU RS2507 Fig. 2 - DERATING CURVE FOR 300 250 200 150 100 50 0 1 10 100 AVERAGE FORWARD OUTPUT CURRENT AMPERES PEAK FORWARD SURGE CURRENT, (A) Fig. 1 - MAXIMUM FORWARD SURGE CURRENT OUTPUT RECTIFIED CURRENT 40 30 20 10 0 50 TEMPERATURE, 0 C NUMBER OF CYCLES AT 60 Hz Fig. 3 - TYPICAL FORWARD CHARACTERISTICS Fig. 4 - TYPICAL REVERSE CHARACTERISTICS 100 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 150 100 10 1.0 1.0 TJ=250C 0.1 0.1 .01 0 .01 .4 .6 .8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE 120 140